Several architectures select GENERIC_IRQ_MULTI_HANDLER and branch to
handle_arch_irq() without performing any entry accounting.
Add a generic wrapper to handle the common irqentry work when invoking
handle_arch_irq(). Where an architecture needs to perform some entry
accounting itself, it will need to invoke handle_arch_irq() itself.
In subsequent patches it will become the responsibilty of the entry code
to set the irq regs when entering an IRQ (rather than deferring this to
an irqchip handler), so generic_handle_arch_irq() is made to set the irq
regs now. This can be redundant in some cases, but is never harmful as
saving/restoring the old regs nests safely.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
There are no callers for early_init_dt_scan_chosen_arch(), so remove it.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lkml.kernel.org/r/20211022164642.2815706-1-robh@kernel.org
Drivers using the new IRQCHIP_PLATFORM_DRIVER_BEGIN helper
fail to link when compile-testing without CONFIG_OF,
as that means CONFIG_IRQCHIP is disabled as well:
ld.lld: error: undefined symbol: platform_irqchip_probe
>>> referenced by irq-meson-gpio.c
>>> irqchip/irq-meson-gpio.o:(meson_gpio_intc_driver) in archive drivers/built-in.a
>>> referenced by irq-mchp-eic.c
>>> irqchip/irq-mchp-eic.o:(mchp_eic_driver) in archive drivers/built-in.a
As the drivers are not actually used in this case, just
making the reference to this symbol conditional helps
avoid the link failure.
Fixes: f8410e6265 ("irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211022154927.920491-1-arnd@kernel.org
The ptdma driver has added debugfs support, but this fails to build
when debugfs is disabled:
drivers/dma/ptdma/ptdma-debugfs.c: In function 'ptdma_debugfs_setup':
drivers/dma/ptdma/ptdma-debugfs.c:93:54: error: 'struct dma_device' has no member named 'dbg_dev_root'
93 | debugfs_create_file("info", 0400, pt->dma_dev.dbg_dev_root, pt,
| ^
drivers/dma/ptdma/ptdma-debugfs.c:96:55: error: 'struct dma_device' has no member named 'dbg_dev_root'
96 | debugfs_create_file("stats", 0400, pt->dma_dev.dbg_dev_root, pt,
| ^
drivers/dma/ptdma/ptdma-debugfs.c:102:52: error: 'struct dma_device' has no member named 'dbg_dev_root'
102 | debugfs_create_dir("q", pt->dma_dev.dbg_dev_root);
| ^
Remove the #ifdef in the header, as this only saves a few bytes,
but would require ugly #ifdefs in each driver using it.
Simplify the other user while we're at it.
Fixes: e2fb2e2a33 ("dmaengine: ptdma: Add debugfs entries for PTDMA")
Fixes: 26cf132de6 ("dmaengine: Create debug directories for DMA devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210920122017.205975-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
struct can_tdc::tdco represents the absolute offset from TDCV. Some
controllers use instead an offset relative to the Sample Point (SP)
such that:
| SSP = TDCV + absolute TDCO
| = TDCV + SP + relative TDCO
Consequently:
| relative TDCO = absolute TDCO - SP
The function can_tdc_get_relative_tdco() allow to retrieve this
relative TDCO value.
Link: https://lore.kernel.org/all/20210918095637.20108-7-mailhol.vincent@wanadoo.fr
CC: Stefan Mätje <Stefan.Maetje@esd.eu>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Some CAN device can measure the TDCV (Transmission Delay Compensation
Value) automatically for each transmitted CAN frames.
A callback function do_get_auto_tdcv() is added to retrieve that
value. This function is used only if CAN_CTRLMODE_TDC_AUTO is enabled
(if CAN_CTRLMODE_TDC_MANUAL is selected, the TDCV value is provided by
the user).
If the device does not support reporting of TDCV, do_get_auto_tdcv()
should be set to NULL and TDCV will not be reported by the netlink
interface.
On success, do_get_auto_tdcv() shall return 0. If the value can not be
measured by the device, for example because network is down or because
no frames were transmitted yet, can_priv::do_get_auto_tdcv() shall
return a negative error code (e.g. -EINVAL) to signify that the value
is not yet available. In such cases, TDCV is not reported by the
netlink interface.
Link: https://lore.kernel.org/all/20210918095637.20108-6-mailhol.vincent@wanadoo.fr
CC: Stefan Mätje <stefan.maetje@esd.eu>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The function can_calc_tdco() directly retrieves can_priv from the
net_device and directly modifies it.
This is annoying for the upcoming patch. In
drivers/net/can/dev/netlink.c:can_changelink(), the data bittiming are
written to a temporary structure and memcpyed to can_priv only after
everything succeeded. In the next patch, where we will introduce the
netlink interface for TDC parameters, we will add a new TDC block
which can potentially fail. For this reason, the data bittiming
temporary structure has to be copied after that to-be-introduced TDC
block. However, TDC also needs to access data bittiming information.
We change the prototype so that the data bittiming structure is passed
to can_calc_tdco() as an argument instead of retrieving it from
priv. This way can_calc_tdco() can access the data bittiming before it
gets memcpyed to priv.
Link: https://lore.kernel.org/all/20210918095637.20108-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In the current implementation, all Transmission Delay Compensation
(TDC) parameters are expressed in time quantum. However, ISO 11898-1
actually specifies that these should be expressed in *minimum* time
quantum.
Furthermore, the minimum time quantum is specified to be "one node
clock period long" (c.f. paragraph 11.3.1.1 "Bit time"). For sake of
simplicity, we prefer to use the "clock period" term instead of
"minimum time quantum" because we believe that it is more broadly
understood.
This patch fixes that discrepancy by updating the documentation and
the formula for TDCO calculation.
N.B. In can_calc_tdco(), the sample point (in time quantum) was
calculated using a division, thus introducing a risk of rounding and
truncation errors. On top of changing the unit to clock period, we
also modified the formula to use only additions.
Link: https://lore.kernel.org/all/20210918095637.20108-3-mailhol.vincent@wanadoo.fr
Suggested-by: Stefan Mätje <Stefan.Maetje@esd.eu>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
ISO 11898-1 specifies in section 11.3.3 "Transmitter delay
compensation" that "the configuration range for [the] SSP position
shall be at least 0 to 63 minimum time quanta."
Because SSP = TDCV + TDCO, it means that we should allow both TDCV and
TDCO to hold zero value in order to honor SSP's minimum possible
value.
However, current implementation assigned special meaning to TDCV and
TDCO's zero values:
* TDCV = 0 -> TDCV is automatically measured by the transceiver.
* TDCO = 0 -> TDC is off.
In order to allow for those values to really be zero and to maintain
current features, we introduce two new flags:
* CAN_CTRLMODE_TDC_AUTO indicates that the controller support
automatic measurement of TDCV.
* CAN_CTRLMODE_TDC_MANUAL indicates that the controller support
manual configuration of TDCV. N.B.: current implementation failed
to provide an option for the driver to indicate that only manual
mode was supported.
TDC is disabled if both CAN_CTRLMODE_TDC_AUTO and
CAN_CTRLMODE_TDC_MANUAL flags are off, c.f. the helper function
can_tdc_is_enabled() which is also introduced in this patch.
Also, this patch adds three fields: tdcv_min, tdco_min and tdcf_min to
struct can_tdc_const. While we are not convinced that those three
fields could be anything else than zero, we can imagine that some
controllers might specify a lower bound on these. Thus, those minimums
are really added "just in case".
Comments of struct can_tdc and can_tdc_const are updated accordingly.
Finally, the changes are applied to the etas_es58x driver.
Link: https://lore.kernel.org/all/20210918095637.20108-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Introduce a new nofault flag to indicate to iov_iter_get_pages not to
fault in user pages.
This is implemented by passing the FOLL_NOFAULT flag to get_user_pages,
which causes get_user_pages to fail when it would otherwise fault in a
page. We'll use the ->nofault flag to prevent iomap_dio_rw from faulting
in pages when page faults are not allowed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Introduce a new FOLL_NOFAULT flag that causes get_user_pages to return
-EFAULT when it would otherwise trigger a page fault. This is roughly
similar to FOLL_FAST_ONLY but available on all architectures, and less
fragile.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add a done_before argument to iomap_dio_rw that indicates how much of
the request has already been transferred. When the request succeeds, we
report that done_before additional bytes were tranferred. This is
useful for finishing a request asynchronously when part of the request
has already been completed synchronously.
We'll use that to allow iomap_dio_rw to be used with page faults
disabled: when a page fault occurs while submitting a request, we
synchronously complete the part of the request that has already been
submitted. The caller can then take care of the page fault and call
iomap_dio_rw again for the rest of the request, passing in the number of
bytes already tranferred.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
In iomap_dio_rw, when iomap_apply returns an -EFAULT error and the
IOMAP_DIO_PARTIAL flag is set, complete the request synchronously and
return a partial result. This allows the caller to deal with the page
fault and retry the remainder of the request.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
7712 is a 16nm process SoC with a 10/100 integrated Ethernet PHY,
utilize the recently defined 16nm EPHY macro to configure that PHY.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds some helpers for accessing non-phy MDIO devices. They are
analogous to phy_(read|write|modify), except that they take an mdio_device
and not a phy_device.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
New device support
* adrf6780 microwave upconverter.
- New driver for this interesting device including bindings.
Features
* lite-on ltr501
- Add dt-bindings including vendor ID and of_device_id table.
- Add regulator support.
* sensiron,scd4x
- Add reporting of channel scale.
Cleanups including fixes for things in this cycle
* Tree wide: Another set of dev_err_probe() introductions to reduce
noise in logs when deferred probing is needed and provide more debug
info. Devices included this time:
- amlogic,meson_saradc
- capella,cm3605
- fsl,imx7d
- maxim,max1118
- maxim,max1241
- nxp,lpc18xx
- qcom,pm8xxxx-xoadc
- rockchip,saradc
- sharp,gp2ap002
- sterricson,ab8500
- ti,ads7950
* core - iio:buffer
- Fix a path where a ret value is not intialized.
* channel-mux
- Add support to mux core subsystem for a settling delay and use
it in the iio-channel-mux driver.
- Fix a few dt binding warnings.
* nxp,lpc18xx
- Convert to devm_ functions for all of probe and drop remove()
* st,lsm6dsx
- Suppress a warning due to lack of handling of an enum *_MAX entry
that is just there to get the size.
* st,stm32-adc
- Add generic channel binding, deprecating the old approach.
- Add nvmem support to get calibration data for the vrefint channel and
use it to perform such calibration.
- Add a binding for sample-time to the generic channel description as it
can be per channel.
* ti,adc128s052
- Use devm_ managed functions and drop remove()
* vti,sca3000
- Use sign_extend32() rather than opencoding.
* xilinx,xadc
- Drop irq field from state structure as now just used in probe.
-----BEGIN PGP SIGNATURE-----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=XWvW
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.16b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
2nd set of IIO new driver, cleanups and features for the 5.16 cycle
New device support
* adrf6780 microwave upconverter.
- New driver for this interesting device including bindings.
Features
* lite-on ltr501
- Add dt-bindings including vendor ID and of_device_id table.
- Add regulator support.
* sensiron,scd4x
- Add reporting of channel scale.
Cleanups including fixes for things in this cycle
* Tree wide: Another set of dev_err_probe() introductions to reduce
noise in logs when deferred probing is needed and provide more debug
info. Devices included this time:
- amlogic,meson_saradc
- capella,cm3605
- fsl,imx7d
- maxim,max1118
- maxim,max1241
- nxp,lpc18xx
- qcom,pm8xxxx-xoadc
- rockchip,saradc
- sharp,gp2ap002
- sterricson,ab8500
- ti,ads7950
* core - iio:buffer
- Fix a path where a ret value is not intialized.
* channel-mux
- Add support to mux core subsystem for a settling delay and use
it in the iio-channel-mux driver.
- Fix a few dt binding warnings.
* nxp,lpc18xx
- Convert to devm_ functions for all of probe and drop remove()
* st,lsm6dsx
- Suppress a warning due to lack of handling of an enum *_MAX entry
that is just there to get the size.
* st,stm32-adc
- Add generic channel binding, deprecating the old approach.
- Add nvmem support to get calibration data for the vrefint channel and
use it to perform such calibration.
- Add a binding for sample-time to the generic channel description as it
can be per channel.
* ti,adc128s052
- Use devm_ managed functions and drop remove()
* vti,sca3000
- Use sign_extend32() rather than opencoding.
* xilinx,xadc
- Drop irq field from state structure as now just used in probe.
* tag 'iio-for-5.16b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (36 commits)
dt-bindings: iio: frequency: add adrf6780 doc
iio: frequency: adrf6780: add support for ADRF6780
iio: chemical: scd4x: Add a scale for the co2 concentration reading
dt-bindings: iio: io-channel-mux: allow duplicate channel, labels
dt-bindings: iio: io-channel-mux: add optional #io-channel-cells
iio: adc: adc128s052: Simplify adc128_probe()
iio: multiplexer: iio-mux: Support settle-time-us property
dt-bindings: iio: io-channel-mux: Add property for settle time
mux: add support for delay after muxing
iio: adc: stm32-adc: use generic binding for sample-time
iio: adc: stm32-adc: add vrefint calibration support
iio: adc: stm32-adc: add support of internal channels
iio: adc: stm32-adc: add support of generic channels binding
iio: adc: stm32-adc: split channel init into several routines
dt-bindings: iio: stm32-adc: add nvmem support for vrefint internal channel
dt-bindings: iio: stm32-adc: add generic channel binding
iio: accel: sca3000: Use sign_extend32() instead of opencoding sign extension.
iio: xilinx-xadc: Remove `irq` field from state struct
iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr()
iio: light: gp2ap002: Make use of the helper function dev_err_probe()
...
If CONFIG_BLOCK isn't set, then it's an empty struct anyway. Just make
it generally available, so we don't break the compile:
kernel/sched/core.c: In function ‘sched_submit_work’:
kernel/sched/core.c:6346:35: error: ‘struct task_struct’ has no member named ‘plug’
6346 | blk_flush_plug(tsk->plug, true);
| ^~
kernel/sched/core.c: In function ‘io_schedule_prepare’:
kernel/sched/core.c:8357:20: error: ‘struct task_struct’ has no member named ‘plug’
8357 | if (current->plug)
| ^~
kernel/sched/core.c:8358:39: error: ‘struct task_struct’ has no member named ‘plug’
8358 | blk_flush_plug(current->plug, true);
| ^~
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 008f75a20e ("block: cleanup the flush plug helpers")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* the applicable eth_hw_addr_set() and const hw_addr changes
* various code cleanups/refactorings
* stack usage reductions across the wireless stack
* some unstructured find_ie() -> structured find_element()
changes
* a few more pieces of multi-BSSID support
* some 6 GHz regulatory support
* 6 GHz support in hwsim, for testing userspace code
* Light Communications (LC, 802.11bb) early band definitions
to be able to add a first driver soon
-----BEGIN PGP SIGNATURE-----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=ZXrI
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Quite a few changes:
* the applicable eth_hw_addr_set() and const hw_addr changes
* various code cleanups/refactorings
* stack usage reductions across the wireless stack
* some unstructured find_ie() -> structured find_element()
changes
* a few more pieces of multi-BSSID support
* some 6 GHz regulatory support
* 6 GHz support in hwsim, for testing userspace code
* Light Communications (LC, 802.11bb) early band definitions
to be able to add a first driver soon
* tag 'mac80211-next-for-net-next-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits)
cfg80211: fix kernel-doc for MBSSID EMA
mac80211: Prevent AP probing during suspend
nl80211: Add LC placeholder band definition to nl80211_band
...
====================
Link: https://lore.kernel.org/r/20211021154953.134849-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Get rid of the indirections and just provide a sync_bdevs
helper for the generic sync code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211019062530.2174626-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead offer a new sync_blockdev_nowait helper for the !wait case.
This new helper is exported as it will grow modular callers in a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211019062530.2174626-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Export scsi_device_from_queue for use with pktcdvd and use that instead
of the otherwise unused QUEUE_FLAG_SCSI_PASSTHROUGH queue flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a method to query unique IDs from block devices. It will be used to
remove code that deeply pokes into SCSI internals in the NFS server.
The implementation in the sd driver itself is also much nicer as it can
use the cached VPD page instead of always sending a command as the
current NFS code does.
For now the interface is kept very minimal but could be easily
extended when other users like a block-layer sysfs interface for
uniquue IDs shows up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that x86 doesn't abuse picking at internals to the firmware
loader move out the built-in firmware struct to its only user.
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211021155843.1969401-5-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was never used upstream. Time to get rid of it. We
don't carry around unused baggage.
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211021155843.1969401-3-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Formalize the built-in firmware with a proper API. This can later
be used by other callers where all they need is built-in firmware.
We export the firmware_request_builtin() call for now only
under the TEST_FIRMWARE symbol namespace as there are no
direct modular users for it. If they pop up they are free
to export it generally. Built-in code always gets access to
the callers and we'll demonstrate a hidden user which has been
lurking in the kernel for a while and the reason why using a
proper API was better long term.
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211021155843.1969401-2-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Until now, we have only ever seen the REG-category registry being used
on devices addressed with target ID 2. In fact, we have only ever seen
Surface Aggregator Module (SAM) HID devices with target ID 2. For those
devices, the registry also has to be addressed with target ID 2.
Some devices, like the new Surface Laptop Studio, however, address their
HID devices on target ID 1. As a result of this, any target ID 2
commands time out. This includes event management commands addressed to
the target ID 2 REG-category registry. For these devices, the registry
has to be addressed via target ID 1 instead.
We therefore assume that the target ID of the registry to be used
depends on the target ID of the respective device. Implement this
accordingly.
Note that we currently allow the surface HID driver to only load against
devices with target ID 2, so these timeouts are not happening (yet).
This is just a preparation step before we allow the driver to load
against all target IDs.
Cc: stable@vger.kernel.org # 5.14+
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211021130904.862610-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- SBEFIFO usersapce interfaces to perform FFDC (First Failure
Data Capture) and detect timeouts
- A fix to handle multiple messages in flight
-----BEGIN PGP SIGNATURE-----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=ug/2
-----END PGP SIGNATURE-----
Merge tag 'fsi-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next
Joel writes:
FSI changes for v5.16
- SBEFIFO usersapce interfaces to perform FFDC (First Failure
Data Capture) and detect timeouts
- A fix to handle multiple messages in flight
* tag 'fsi-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi:
fsi: sbefifo: Use interruptible mutex locking
fsi: sbefifo: Add sysfs file indicating a timeout error
docs: ABI: testing: Document the SBEFIFO timeout interface
hwmon: (occ) Provide the SBEFIFO FFDC in binary sysfs
docs: ABI: testing: Document the OCC hwmon FFDC binary interface
fsi: occ: Store the SBEFIFO FFDC in the user response buffer
fsi: occ: Use a large buffer for responses
hwmon: (occ) Remove sequence numbering and checksum calculation
fsi: occ: Force sequence numbering per OCC
Pull ucounts fixes from Eric Biederman:
"There has been one very hard to track down bug in the ucount code that
we have been tracking since roughly v5.14 was released. Alex managed
to find a reliable reproducer a few days ago and then I was able to
instrument the code and figure out what the issue was.
It turns out the sigqueue_alloc single atomic operation optimization
did not play nicely with ucounts multiple level rlimits. It turned out
that either sigqueue_alloc or sigqueue_free could be operating on
multiple levels and trigger the conditions for the optimization on
more than one level at the same time.
To deal with that situation I have introduced inc_rlimit_get_ucounts
and dec_rlimit_put_ucounts that just focuses on the optimization and
the rlimit and ucount changes.
While looking into the big bug I found I couple of other little issues
so I am including those fixes here as well.
When I have time I would very much like to dig into process ownership
of the shared signal queue and see if we could pick a single owner for
the entire queue so that all of the rlimits can count to that owner.
That should entirely remove the need to call get_ucounts and
put_ucounts in sigqueue_alloc and sigqueue_free. It is difficult
because Linux unlike POSIX supports setuid that works on a single
thread"
* 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring
ucounts: Proper error handling in set_cred_ucounts
ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_creds
ucounts: Fix signal ucount refcounting
Current release - regressions:
- revert "vrf: reset skb conntrack connection on VRF rcv",
there are valid uses for previous behavior
- can: m_can: fix iomap_read_fifo() and iomap_write_fifo()
Current release - new code bugs:
- mlx5: e-switch, return correct error code on group creation failure
Previous releases - regressions:
- sctp: fix transport encap_port update in sctp_vtag_verify
- stmmac: fix E2E delay mechanism (in PTP timestamping)
Previous releases - always broken:
- netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr
- netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of init
- netfilter: ipvs: make global sysctl read-only in non-init netns
- tcp: md5: fix selection between vrf and non-vrf keys
- ipv6: count rx stats on the orig netdev when forwarding
- bridge: mcast: use multicast_membership_interval for IGMPv3
- can:
- j1939: fix UAF for rx_kref of j1939_priv
abort sessions on receiving bad messages
- isotp: fix TX buffer concurrent access in isotp_sendmsg()
fix return error on FC timeout on TX path
- ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited
- hns3: schedule the polling again when allocation fails,
prevent stalls
- drivers: add missing of_node_put() when aborting
for_each_available_child_of_node()
- ptp: fix possible memory leak and UAF in ptp_clock_register()
- e1000e: fix packet loss in burst mode on Tiger Lake and later
- mlx5e: ipsec: fix more checksum offload issues
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmFxgHwACgkQMUZtbf5S
IrvFgw//T73aR3B2Xvz5/1rtglfmtcUqFQsyGDXGD5HnfbAbsRcz8vcQ/mTsExl7
+mJY/ZuQefsD7UQDyg3GNhbgf1+pEjHC81ryeNsfET7+JxgYLD3NEYSBYUqIFZUo
gStAStGBG+ClQUaqlkGFyyf6GrqwpmxZKRr6F9fUsufQ14m9tvcT/QPcrXL4q7qX
Fz644yUe/IvKnuJDHJVZsc8UXR9NTPCyCNJT9kVewwPMIMEc/xMOg5QONLZT0TlC
Zk4XJIqlBBEQWrN/QwrGXm82aO+3gQZyD5K9AvpczgcBjOr6FJOmN6zkQrqNNWaC
2wPAfWi7DALPtOZR6lCxoeWfLRfdn1ZOn5x2z5xrtAXCV2FTaMg8in9TzJ57qmcb
/l43QzcNGSj1ytyny8pqgdsX2MSqs0O5VSG4egMtz7TeU/rs7uAx2IVHbPT8CHop
PvhVHeUeu9lGu+FUK8piQbb5aVpbA9qlOj/rXNrHDIxdA9McQgVs+tljNG4X5KtX
L7BR84wNg98HtIINVx6RjYz9lOpG1qBuw5RCiqiAaN1RBY7lYAhMaAE6U3azjgC+
AIz/MacNuAz/oTuutQB6/0WZDDJhy4WEy3TrDLlpQNz6yIrpKFN+ftyF6DuVUSMH
PmtZ4E/DLooQL5KwuoDdYDH1gSMlggBejeGHTFJ+RUMuvRePZQ8=
=Hwqr
-----END PGP SIGNATURE-----
Merge tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, and can.
We'll have one more fix for a socket accounting regression, it's still
getting polished. Otherwise things look fine.
Current release - regressions:
- revert "vrf: reset skb conntrack connection on VRF rcv", there are
valid uses for previous behavior
- can: m_can: fix iomap_read_fifo() and iomap_write_fifo()
Current release - new code bugs:
- mlx5: e-switch, return correct error code on group creation failure
Previous releases - regressions:
- sctp: fix transport encap_port update in sctp_vtag_verify
- stmmac: fix E2E delay mechanism (in PTP timestamping)
Previous releases - always broken:
- netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr
- netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of
init
- netfilter: ipvs: make global sysctl read-only in non-init netns
- tcp: md5: fix selection between vrf and non-vrf keys
- ipv6: count rx stats on the orig netdev when forwarding
- bridge: mcast: use multicast_membership_interval for IGMPv3
- can:
- j1939: fix UAF for rx_kref of j1939_priv abort sessions on
receiving bad messages
- isotp: fix TX buffer concurrent access in isotp_sendmsg() fix
return error on FC timeout on TX path
- ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited
- hns3: schedule the polling again when allocation fails, prevent
stalls
- drivers: add missing of_node_put() when aborting
for_each_available_child_of_node()
- ptp: fix possible memory leak and UAF in ptp_clock_register()
- e1000e: fix packet loss in burst mode on Tiger Lake and later
- mlx5e: ipsec: fix more checksum offload issues"
* tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
usbnet: sanity check for maxpacket
net: enetc: make sure all traffic classes can send large frames
net: enetc: fix ethtool counter name for PM0_TERR
ptp: free 'vclock_index' in ptp_clock_release()
sfc: Don't use netif_info before net_device setup
sfc: Export fibre-specific supported link modes
net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags
net/mlx5e: IPsec: Fix a misuse of the software parser's fields
net/mlx5e: Fix vlan data lost during suspend flow
net/mlx5: E-switch, Return correct error code on group creation failure
net/mlx5: Lag, change multipath and bonding to be mutually exclusive
ice: Add missing E810 device ids
igc: Update I226_K device ID
e1000e: Fix packet loss on Tiger Lake and later
e1000e: Separate TGP board type from SPT
ptp: Fix possible memory leak in ptp_clock_register()
net: stmmac: Fix E2E delay mechanism
nfc: st95hf: Make spi remove() callback return zero
net: hns3: disable sriov before unload hclge layer
net: hns3: fix vf reset workqueue cannot exit
...
Allocate a large buffer for each OCC to handle response data. This
removes memory allocation during an operation, and also allows for
the maximum amount of SBE FFDC.
Previously for the putsram and attn commands, only 32 words would have
been available, and for getsram, only up to the size of the transfer.
SBE FFDC might be up to 8Kb.
The SBE interface expects data to be specified in units of words (4
bytes), defined as OCC_MAX_RESP_WORDS.
This change allows the full FFDC capture to be implemented, where before
it was not available.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211019205307.36946-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
`__compiletime_assert` declares a fake `extern` function
which appears (to the compiler) to be called when the test fails.
Therefore, compilers may emit possibly-uninitialized warnings
in some cases, even if it will be an error anyway (for compilers
supporting the `error` attribute, e.g. GCC and Clang >= 14)
or a link failure (for those that do not, e.g. Clang < 14).
Annotating the fake function as `__noreturn` gives them
the information they need to avoid the warning,
e.g. see https://godbolt.org/z/x1v69jjYY.
Link: https://lore.kernel.org/llvm/202110100514.3h9CI4s0-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This stat is currently printed in the verifier log and not stored
anywhere. To ease consumption of this data, add a field to bpf_prog_aux
so it can be exposed via BPF_OBJ_GET_INFO_BY_FD and fdinfo.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211020074818.1017682-2-davemarchevsky@fb.com
The helper is used in tracing programs to cast a socket
pointer to a unix_sock pointer.
The return value could be NULL if the casting is illegal.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021134752.1223426-2-hengqi.chen@gmail.com
Hardware may require some time for the muxed analog signals to settle
after the muxing is changed. Allow users of the mux subsystem to
specify this delay with the new mux_control_select_delay() function (and
the _try equivalent).
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20211007134641.13417-2-vincent.whitchurch@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The current text of the explanation of the transition bit in the trace
recursion protection is not very clear. Improve the text, so that when all
the archs no longer have the issue of tracing between a start of a new
(interrupt) context and updating the preempt_count to reflect the new
context, that it may be removed.
Link: https://lore.kernel.org/all/20211018220203.064a42ed@gandalf.local.home/
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Adding interface to modify registered direct function
for ftrace_ops. Adding following function:
modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
The function changes the currently registered direct
function for all attached functions.
Link: https://lkml.kernel.org/r/20211008091336.33616-8-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Adding interface to register multiple direct functions
within single call. Adding following functions:
register_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
unregister_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
The register_ftrace_direct_multi registers direct function (addr)
with all functions in ops filter. The ops filter can be updated
before with ftrace_set_filter_ip calls.
All requested functions must not have direct function currently
registered, otherwise register_ftrace_direct_multi will fail.
The unregister_ftrace_direct_multi unregisters ops related direct
functions.
Link: https://lkml.kernel.org/r/20211008091336.33616-7-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
dtpm structure only (Daniel Lezcano)
- Fix the power intialization (Daniel Lezcano)
- Add the CPU load ponderation when estimating the instaneous power
consumption (Daniel Lezcano)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmFxfGcACgkQqDIjiipP
6E+TGgf/dWKtga4DrwY6GhffbQTCOuoTMThYFE+bUQBXoB5SRQ6xAdtpbYyQbGS/
jfErRk8EMQDHTnlvL/LQYPdgy9ckX79ShVEJN/9U53E7ENBxZvdvG8BaK30zl99D
FARtF+Q3ekhmu3R6LHEOMFzotk4tLhLakV5huf0bKaXjPvxV/xg2fRjwN8uE15Ze
uV3E0jny0zGy13TKcFa8cUs0yhv42q9u46SSjGNviG92kHGm3uWedvWIjXq+JXsN
4XKPkGQDQ1XMG4yWy92dDCVKBjy+D0pKp1aAT6WJkMIS+0bj8NqZVAy+0TvjYUPI
Bc9bKQXMwN7/LQlTCYLuFraaUHD/xw==
=BjBl
-----END PGP SIGNATURE-----
Merge tag 'dtpm-v5.16' of https://git.linaro.org/people/daniel.lezcano/linux
Pull Dynamic Thermal Power Management (DTPM) framework changes for v5.16
from Daniel Lezcano:
- Simplify and make the code more self-encapsulate by dealing with the
dtpm structure only (Daniel Lezcano)
- Fix power intialization (Daniel Lezcano)
- Add the CPU load consideration when estimating the instaneous power
consumption (Daniel Lezcano)
* tag 'dtpm-v5.16' of https://git.linaro.org/people/daniel.lezcano/linux:
powercap/drivers/dtpm: Fix power limit initialization
powercap/drivers/dtpm: Scale the power with the load
powercap/drivers/dtpm: Use container_of instead of a private data field
powercap/drivers/dtpm: Simplify the dtpm table
powercap/drivers/dtpm: Encapsulate even more the code
blk_keyslot_manager is misnamed because it doesn't necessarily manage
keyslots. It actually does several different things:
- Contains the crypto capabilities of the device.
- Provides functions to control the inline encryption hardware.
Originally these were just for programming/evicting keyslots;
however, new functionality (hardware-wrapped keys) will require new
functions here which are unrelated to keyslots. Moreover,
device-mapper devices already (ab)use "keyslot_evict" to pass key
eviction requests to their underlying devices even though
device-mapper devices don't have any keyslots themselves (so it
really should be "evict_key", not "keyslot_evict").
- Sometimes (but not always!) it manages keyslots. Originally it
always did, but device-mapper devices don't have keyslots
themselves, so they use a "passthrough keyslot manager" which
doesn't actually manage keyslots. This hack works, but the
terminology is unnatural. Also, some hardware doesn't have keyslots
and thus also uses a "passthrough keyslot manager" (support for such
hardware is yet to be upstreamed, but it will happen eventually).
Let's stop having keyslot managers which don't actually manage keyslots.
Instead, rename blk_keyslot_manager to blk_crypto_profile.
This is a fairly big change, since for consistency it also has to update
keyslot manager-related function names, variable names, and comments --
not just the actual struct name. However it's still a fairly
straightforward change, as it doesn't change any actual functionality.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211018180453.40441-4-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for renaming struct blk_keyslot_manager to struct
blk_crypto_profile, rename the keyslot-manager.h and keyslot-manager.c
source files. Renaming these files separately before making a lot of
changes to their contents makes it easier for git to understand that
they were renamed.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211018180453.40441-3-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To hide internal implementation and simplify some driver code,
this adds a helper to invalidate the gendisk. It will clean the
gendisk's associated buffer/page caches and reset its internal
states.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210922123711.187-2-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The dtpm framework provides an API to allocate a dtpm node. However
when a backend dtpm driver needs to allocate a dtpm node it must
define its own structure and store the pointer of this structure in
the private field of the dtpm structure.
It is more elegant to use the container_of macro and add the dtpm
structure inside the dtpm backend specific structure. The code will be
able to deal properly with the dtpm structure as a generic entity,
making all this even more self-encapsulated.
The dtpm_alloc() function does no longer make sense as the dtpm
structure will be allocated when allocating the device specific dtpm
structure. The dtpm_init() is provided instead.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210312130411.29833-4-daniel.lezcano@linaro.org
The dtpm table is an array of pointers, that forces the user of the
table to define initdata along with the declaration of the table
entry. It is more efficient to create an array of dtpm structure, so
the declaration of the table entry can be done by initializing the
different fields.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210312130411.29833-3-daniel.lezcano@linaro.org
In order to increase the self-encapsulation of the dtpm generic code,
the following changes are adding a power update ops to the dtpm
ops. That allows the generic code to call directly the dtpm backend
function to update the power values.
The power update function does compute the power characteristics when
the function is invoked. In the case of the CPUs, the power
consumption depends on the number of online CPUs. The online CPUs mask
is not up to date at CPUHP_AP_ONLINE_DYN state in the tear down
callback. That is the reason why the online / offline are at separate
state. As there is already an existing state for DTPM, this one is
only moved to the DEAD state, so there is no addition of new state
with these changes. The dtpm node is not removed when the cpu is
unplugged.
That simplifies the code for the next changes and results in a more
self-encapsulated code.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210312130411.29833-1-daniel.lezcano@linaro.org
Removing all linux/gpio.h and linux/of_gpio.h dependencies and replacing
them with the gpiod interface.
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Link: https://lore.kernel.org/r/YWxmL2baF5AdzyHv@fedora
Signed-off-by: Mark Brown <broonie@kernel.org>
