Pull i2c material for 5.18 that is depended on by subsequent device
properties changes.
* 'i2c/alert-for-acpi' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: Use device_*() functions instead of of_*()
docs: firmware-guide: ACPI: Add named interrupt doc
device property: Add fwnode_irq_get_byname
Currently the rcache structures are allocated for all IOVA domains, even if
they do not use "fast" alloc+free interface. This is wasteful of memory.
In addition, fails in init_iova_rcaches() are not handled safely, which is
less than ideal.
Make "fast" users call a separate rcache init explicitly, which includes
error checking.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/1643882360-241739-1-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
WWAN driver call's wwan_get_debugfs_dir() to obtain
WWAN debugfs dir entry. As part of this procedure it
returns a reference to a found device.
Since there is no debugfs interface available at WWAN
subsystem, it is not possible to drop dev reference post
debugfs use. This leads to side effects like post wwan
driver load and reload the wwan instance gets increment
from wwanX to wwanX+1.
A new debugfs interface is added in wwan subsystem so that
wwan driver can drop the obtained dev reference post debugfs
use.
void wwan_put_debugfs_dir(struct dentry *dir)
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave suggested a while ago (eleven years by now) "Let's make netif_rx()
work in all contexts and get rid of netif_rx_ni()". Eric agreed and
pointed out that modern devices should use netif_receive_skb() to avoid
the overhead.
In the meantime someone added another variant, netif_rx_any_context(),
which behaves as suggested.
netif_rx() must be invoked with disabled bottom halves to ensure that
pending softirqs, which were raised within the function, are handled.
netif_rx_ni() can be invoked only from process context (bottom halves
must be enabled) because the function handles pending softirqs without
checking if bottom halves were disabled or not.
netif_rx_any_context() invokes on the former functions by checking
in_interrupts().
netif_rx() could be taught to handle both cases (disabled and enabled
bottom halves) by simply disabling bottom halves while invoking
netif_rx_internal(). The local_bh_enable() invocation will then invoke
pending softirqs only if the BH-disable counter drops to zero.
Eric is concerned about the overhead of BH-disable+enable especially in
regard to the loopback driver. As critical as this driver is, it will
receive a shortcut to avoid the additional overhead which is not needed.
Add a local_bh_disable() section in netif_rx() to ensure softirqs are
handled if needed.
Provide __netif_rx() which does not disable BH and has a lockdep assert
to ensure that interrupts are disabled. Use this shortcut in the
loopback driver and in drivers/net/*.c.
Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they
can be removed once they are no more users left.
Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Individual sub-devices may elect to make decisions based on the
specific revision of silicon encountered at probe. This data is
already read from the device, but is not retained.
Pass this data on to the sub-devices by adding the software and
hardware numbers (registers 0x01 and 0x02, respectively) to the
iqs62x_core struct.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
All drivers using GPIOs as chip select have been rewritten to use
GPIO descriptors passing the ->use_gpio_descriptors flag. Retire
the code and fields used by the legacy GPIO API.
Do not drop the ->use_gpio_descriptors flag: it now only indicates
that we want to use GPIOs in addition to native chip selects.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220210231954.807904-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The preferred way to implement SPI-NOR controller drivers is through SPI
subsubsystem utilizing the SPI MEM core functions. This converts the
Intel SPI flash controller driver over the SPI MEM by moving the driver
from SPI-NOR subsystem to SPI subsystem and in one go make it use the
SPI MEM functions. The driver name will be changed from intel-spi to
spi-intel to match the convention used in the SPI subsystem.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mauro Lima <mauro.lima@eclypsium.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20220209122706.42439-3-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the driver tries to disable the BIOS write protection
automatically even if this is not what the user wants. For this reason
modify the driver so that by default it does not touch the write
protection. Only if specifically asked by the user (setting writeable=1
command line parameter) the driver tries to disable the BIOS write
protection.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mauro Lima <mauro.lima@eclypsium.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220209122706.42439-2-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The problem I'm addressing was discovered by the LTP test covering
cve-2018-1000204.
A short description of what happens follows:
1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO
interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV
and a corresponding dxferp. The peculiar thing about this is that TUR
is not reading from the device.
2) In sg_start_req() the invocation of blk_rq_map_user() effectively
bounces the user-space buffer. As if the device was to transfer into
it. Since commit a45b599ad8 ("scsi: sg: allocate with __GFP_ZERO in
sg_build_indirect()") we make sure this first bounce buffer is
allocated with GFP_ZERO.
3) For the rest of the story we keep ignoring that we have a TUR, so the
device won't touch the buffer we prepare as if the we had a
DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device
and the buffer allocated by SG is mapped by the function
virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here
scatter-gather and not scsi generics). This mapping involves bouncing
via the swiotlb (we need swiotlb to do virtio in protected guest like
s390 Secure Execution, or AMD SEV).
4) When the SCSI TUR is done, we first copy back the content of the second
(that is swiotlb) bounce buffer (which most likely contains some
previous IO data), to the first bounce buffer, which contains all
zeros. Then we copy back the content of the first bounce buffer to
the user-space buffer.
5) The test case detects that the buffer, which it zero-initialized,
ain't all zeros and fails.
One can argue that this is an swiotlb problem, because without swiotlb
we leak all zeros, and the swiotlb should be transparent in a sense that
it does not affect the outcome (if all other participants are well
behaved).
Copying the content of the original buffer into the swiotlb buffer is
the only way I can think of to make swiotlb transparent in such
scenarios. So let's do just that if in doubt, but allow the driver
to tell us that the whole mapped buffer is going to be overwritten,
in which case we can preserve the old behavior and avoid the performance
impact of the extra bounce.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIJZmoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZdoH/04d8zUhM3Fd3ACB
V/ONtOXmkfP2mEJSjb7cXTN1EM2SlOBdSnSsEw09FtGhjHABjOnLho4J5ixk9TH8
zNMNI3EMksM2T9KadHwxv8Vvp1LTrWRzMbws8tOCPA0RkOpikJfClC8CzRAyidJ3
cAbbDH/Jl1GnVZ8bpKmv2auYt+kNVGb0cwJ2W8phCwwkL7sLky5tgYeaGiJEXbJf
Tfi/3qtFdmYjD8wtYnCfzjnB7suG5nF7rGEnxCIxNi+IA4DieUv2c1KchuoaBfT9
df364VjKaGT3j+GB07ksQ/8mkwWiRXsCzOXAyMZSZaWjdMD4aAhCTJak5j7/TvGC
wtgHPww=
=/CMW
-----END PGP SIGNATURE-----
Merge 5.17-rc4 into tty-next
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIJZmoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZdoH/04d8zUhM3Fd3ACB
V/ONtOXmkfP2mEJSjb7cXTN1EM2SlOBdSnSsEw09FtGhjHABjOnLho4J5ixk9TH8
zNMNI3EMksM2T9KadHwxv8Vvp1LTrWRzMbws8tOCPA0RkOpikJfClC8CzRAyidJ3
cAbbDH/Jl1GnVZ8bpKmv2auYt+kNVGb0cwJ2W8phCwwkL7sLky5tgYeaGiJEXbJf
Tfi/3qtFdmYjD8wtYnCfzjnB7suG5nF7rGEnxCIxNi+IA4DieUv2c1KchuoaBfT9
df364VjKaGT3j+GB07ksQ/8mkwWiRXsCzOXAyMZSZaWjdMD4aAhCTJak5j7/TvGC
wtgHPww=
=/CMW
-----END PGP SIGNATURE-----
Merge 5.17-rc4 into char-misc-next
We need the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIJZmoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZdoH/04d8zUhM3Fd3ACB
V/ONtOXmkfP2mEJSjb7cXTN1EM2SlOBdSnSsEw09FtGhjHABjOnLho4J5ixk9TH8
zNMNI3EMksM2T9KadHwxv8Vvp1LTrWRzMbws8tOCPA0RkOpikJfClC8CzRAyidJ3
cAbbDH/Jl1GnVZ8bpKmv2auYt+kNVGb0cwJ2W8phCwwkL7sLky5tgYeaGiJEXbJf
Tfi/3qtFdmYjD8wtYnCfzjnB7suG5nF7rGEnxCIxNi+IA4DieUv2c1KchuoaBfT9
df364VjKaGT3j+GB07ksQ/8mkwWiRXsCzOXAyMZSZaWjdMD4aAhCTJak5j7/TvGC
wtgHPww=
=/CMW
-----END PGP SIGNATURE-----
Backmerge tag 'v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Daniel asked for this for some intel deps, so let's do it now.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Enable FORTIFY_SOURCE support for Clang:
Use the new __pass_object_size and __overloadable attributes so that
Clang will have appropriate visibility into argument sizes such that
__builtin_object_size(p, 1) will behave correctly. Additional details
available here:
https://github.com/llvm/llvm-project/issues/53516https://github.com/ClangBuiltLinux/linux/issues/1401
A bug with __builtin_constant_p() of globally defined variables was
fixed in Clang 13 (and backported to 12.0.1), so FORTIFY support must
depend on that version or later. Additional details here:
https://bugs.llvm.org/show_bug.cgi?id=41459
commit a52f8a59ae ("fortify: Explicitly disable Clang support")
A bug with Clang's -mregparm=3 and -m32 makes some builtins unusable,
so removing -ffreestanding (to gain the needed libcall optimizations
with Clang) cannot be done. Without the libcall optimizations, Clang
cannot provide appropriate FORTIFY coverage, so it must be disabled
for CONFIG_X86_32. Additional details here;
https://github.com/llvm/llvm-project/issues/53645
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: George Burgess IV <gbiv@google.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220208225350.1331628-9-keescook@chromium.org
In preparation for enabling Clang FORTIFY_SOURCE support, redefine
strlen() as a macro that tests for being a constant expression
so that strlen() can still be used in static initializers, which is
lost when adding __pass_object_size and __overloadable.
An example of this usage can be seen here:
https://lore.kernel.org/all/202201252321.dRmWZ8wW-lkp@intel.com/
Notably, this constant expression feature of strlen() is not available
for architectures that build with -ffreestanding. This means the kernel
currently does not universally expect strlen() to be used this way, but
since there _are_ some build configurations that depend on it, retain
the characteristic for Clang FORTIFY_SOURCE builds too.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220208225350.1331628-8-keescook@chromium.org
In preparation for using Clang's __pass_object_size, add __diagnose_as()
attributes to mark the functions as being the same as the indicated
builtins. When __daignose_as() is available, Clang will have a more
complete ability to apply its own diagnostic analysis to callers of these
functions, as if they were the builtins themselves. Without __diagnose_as,
Clang's compile time diagnostic messages won't be as precise as they
could be, but at least users of older toolchains will still benefit from
having fortified routines.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220208225350.1331628-7-keescook@chromium.org
In preparation for using Clang's __pass_object_size attribute, make all
the pointer arguments to the fortified string functions const. Nothing
was changing their values anyway, so this added requirement (needed by
__pass_object_size) requires no code changes and has no impact on
the binary instruction output.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220208225350.1331628-6-keescook@chromium.org
Clang will perform various compile-time diagnostics on uses of various
functions (e.g. simple bounds-checking on strcpy(), etc). These
diagnostics can be assigned to other functions (for example, new
implementations of the string functions under CONFIG_FORTIFY_SOURCE)
using the "diagnose_as_builtin" attribute. This allows those functions
to retain their compile-time diagnostic warnings.
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: llvm@lists.linux.dev
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220208225350.1331628-5-keescook@chromium.org
In order for FORTIFY_SOURCE to use __pass_object_size on an "extern
inline" function, as all the fortified string functions are, the functions
must be marked as being overloadable (i.e. different prototypes due
to the implicitly injected object size arguments). This allows the
__pass_object_size versions to take precedence.
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: llvm@lists.linux.dev
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220208225350.1331628-4-keescook@chromium.org
In order to gain greater visibility to type information when using
__builtin_object_size(), Clang has a function attribute "pass_object_size"
that will make size information available for marked arguments in
a function by way of implicit additional function arguments that are
then wired up the __builtin_object_size().
This is needed to implement FORTIFY_SOURCE in Clang, as a workaround
to Clang's __builtin_object_size() having limited visibility[1] into types
across function calls (even inlines).
This attribute has an additional benefit that it can be used even on
non-inline functions to gain argument size information.
[1] https://github.com/llvm/llvm-project/issues/53516
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: llvm@lists.linux.dev
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220208225350.1331628-3-keescook@chromium.org
As done for memcpy(), also update memset() to use the same tightened
compile-time bounds checking under CONFIG_FORTIFY_SOURCE.
Signed-off-by: Kees Cook <keescook@chromium.org>
As done for memcpy(), also update memmove() to use the same tightened
compile-time checks under CONFIG_FORTIFY_SOURCE.
Signed-off-by: Kees Cook <keescook@chromium.org>
memcpy() is dead; long live memcpy()
tl;dr: In order to eliminate a large class of common buffer overflow
flaws that continue to persist in the kernel, have memcpy() (under
CONFIG_FORTIFY_SOURCE) perform bounds checking of the destination struct
member when they have a known size. This would have caught all of the
memcpy()-related buffer write overflow flaws identified in at least the
last three years.
Background and analysis:
While stack-based buffer overflow flaws are largely mitigated by stack
canaries (and similar) features, heap-based buffer overflow flaws continue
to regularly appear in the kernel. Many classes of heap buffer overflows
are mitigated by FORTIFY_SOURCE when using the strcpy() family of
functions, but a significant number remain exposed through the memcpy()
family of functions.
At its core, FORTIFY_SOURCE uses the compiler's __builtin_object_size()
internal[0] to determine the available size at a target address based on
the compile-time known structure layout details. It operates in two
modes: outer bounds (0) and inner bounds (1). In mode 0, the size of the
enclosing structure is used. In mode 1, the size of the specific field
is used. For example:
struct object {
u16 scalar1; /* 2 bytes */
char array[6]; /* 6 bytes */
u64 scalar2; /* 8 bytes */
u32 scalar3; /* 4 bytes */
u32 scalar4; /* 4 bytes */
} instance;
__builtin_object_size(instance.array, 0) == 22, since the remaining size
of the enclosing structure starting from "array" is 22 bytes (6 + 8 +
4 + 4).
__builtin_object_size(instance.array, 1) == 6, since the remaining size
of the specific field "array" is 6 bytes.
The initial implementation of FORTIFY_SOURCE used mode 0 because there
were many cases of both strcpy() and memcpy() functions being used to
write (or read) across multiple fields in a structure. For example,
it would catch this, which is writing 2 bytes beyond the end of
"instance":
memcpy(&instance.array, data, 25);
While this didn't protect against overwriting adjacent fields in a given
structure, it would at least stop overflows from reaching beyond the
end of the structure into neighboring memory, and provided a meaningful
mitigation of a subset of buffer overflow flaws. However, many desirable
targets remain within the enclosing structure (for example function
pointers).
As it happened, there were very few cases of strcpy() family functions
intentionally writing beyond the end of a string buffer. Once all known
cases were removed from the kernel, the strcpy() family was tightened[1]
to use mode 1, providing greater mitigation coverage.
What remains is switching memcpy() to mode 1 as well, but making the
switch is much more difficult because of how frustrating it can be to
find existing "normal" uses of memcpy() that expect to write (or read)
across multiple fields. The root cause of the problem is that the C
language lacks a common pattern to indicate the intent of an author's
use of memcpy(), and is further complicated by the available compile-time
and run-time mitigation behaviors.
The FORTIFY_SOURCE mitigation comes in two halves: the compile-time half,
when both the buffer size _and_ the length of the copy is known, and the
run-time half, when only the buffer size is known. If neither size is
known, there is no bounds checking possible. At compile-time when the
compiler sees that a length will always exceed a known buffer size,
a warning can be deterministically emitted. For the run-time half,
the length is tested against the known size of the buffer, and the
overflowing operation is detected. (The performance overhead for these
tests is virtually zero.)
It is relatively easy to find compile-time false-positives since a warning
is always generated. Fixing the false positives, however, can be very
time-consuming as there are hundreds of instances. While it's possible
some over-read conditions could lead to kernel memory exposures, the bulk
of the risk comes from the run-time flaws where the length of a write
may end up being attacker-controlled and lead to an overflow.
Many of the compile-time false-positives take a form similar to this:
memcpy(&instance.scalar2, data, sizeof(instance.scalar2) +
sizeof(instance.scalar3));
and the run-time ones are similar, but lack a constant expression for the
size of the copy:
memcpy(instance.array, data, length);
The former is meant to cover multiple fields (though its style has been
frowned upon more recently), but has been technically legal. Both lack
any expressivity in the C language about the author's _intent_ in a way
that a compiler can check when the length isn't known at compile time.
A comment doesn't work well because what's needed is something a compiler
can directly reason about. Is a given memcpy() call expected to overflow
into neighbors? Is it not? By using the new struct_group() macro, this
intent can be much more easily encoded.
It is not as easy to find the run-time false-positives since the code path
to exercise a seemingly out-of-bounds condition that is actually expected
may not be trivially reachable. Tightening the restrictions to block an
operation for a false positive will either potentially create a greater
flaw (if a copy is truncated by the mitigation), or destabilize the kernel
(e.g. with a BUG()), making things completely useless for the end user.
As a result, tightening the memcpy() restriction (when there is a
reasonable level of uncertainty of the number of false positives), needs
to first WARN() with no truncation. (Though any sufficiently paranoid
end-user can always opt to set the panic_on_warn=1 sysctl.) Once enough
development time has passed, the mitigation can be further intensified.
(Note that this patch is only the compile-time checking step, which is
a prerequisite to doing run-time checking, which will come in future
patches.)
Given the potential frustrations of weeding out all the false positives
when tightening the run-time checks, it is reasonable to wonder if these
changes would actually add meaningful protection. Looking at just the
last three years, there are 23 identified flaws with a CVE that mention
"buffer overflow", and 11 are memcpy()-related buffer overflows.
(For the remaining 12: 7 are array index overflows that would be
mitigated by systems built with CONFIG_UBSAN_BOUNDS=y: CVE-2019-0145,
CVE-2019-14835, CVE-2019-14896, CVE-2019-14897, CVE-2019-14901,
CVE-2019-17666, CVE-2021-28952. 2 are miscalculated allocation
sizes which could be mitigated with memory tagging: CVE-2019-16746,
CVE-2019-2181. 1 is an iovec buffer bug maybe mitigated by memory tagging:
CVE-2020-10742. 1 is a type confusion bug mitigated by stack canaries:
CVE-2020-10942. 1 is a string handling logic bug with no mitigation I'm
aware of: CVE-2021-28972.)
At my last count on an x86_64 allmodconfig build, there are 35,294
calls to memcpy(). With callers instrumented to report all places
where the buffer size is known but the length remains unknown (i.e. a
run-time bounds check is added), we can count how many new run-time
bounds checks are added when the destination and source arguments of
memcpy() are changed to use "mode 1" bounds checking: 1,276. This means
for the future run-time checking, there is a worst-case upper bounds
of 3.6% false positives to fix. In addition, there were around 150 new
compile-time warnings to evaluate and fix (which have now been fixed).
With this instrumentation it's also possible to compare the places where
the known 11 memcpy() flaw overflows manifested against the resulting
list of potential new run-time bounds checks, as a measure of potential
efficacy of the tightened mitigation. Much to my surprise, horror, and
delight, all 11 flaws would have been detected by the newly added run-time
bounds checks, making this a distinctly clear mitigation improvement: 100%
coverage for known memcpy() flaws, with a possible 2 orders of magnitude
gain in coverage over existing but undiscovered run-time dynamic length
flaws (i.e. 1265 newly covered sites in addition to the 11 known), against
only <4% of all memcpy() callers maybe gaining a false positive run-time
check, with only about 150 new compile-time instances needing evaluation.
Specifically these would have been mitigated:
CVE-2020-24490 https://git.kernel.org/linus/a2ec905d1e160a33b2e210e45ad30445ef26ce0e
CVE-2020-12654 https://git.kernel.org/linus/3a9b153c5591548612c3955c9600a98150c81875
CVE-2020-12653 https://git.kernel.org/linus/b70261a288ea4d2f4ac7cd04be08a9f0f2de4f4d
CVE-2019-14895 https://git.kernel.org/linus/3d94a4a8373bf5f45cf5f939e88b8354dbf2311b
CVE-2019-14816 https://git.kernel.org/linus/7caac62ed598a196d6ddf8d9c121e12e082cac3a
CVE-2019-14815 https://git.kernel.org/linus/7caac62ed598a196d6ddf8d9c121e12e082cac3a
CVE-2019-14814 https://git.kernel.org/linus/7caac62ed598a196d6ddf8d9c121e12e082cac3a
CVE-2019-10126 https://git.kernel.org/linus/69ae4f6aac1578575126319d3f55550e7e440449
CVE-2019-9500 https://git.kernel.org/linus/1b5e2423164b3670e8bc9174e4762d297990deff
no-CVE-yet https://git.kernel.org/linus/130f634da1af649205f4a3dd86cbe5c126b57914
no-CVE-yet https://git.kernel.org/linus/d10a87a3535cce2b890897914f5d0d83df669c63
To accelerate the review of potential run-time false positives, it's
also worth noting that it is possible to partially automate checking
by examining the memcpy() buffer argument to check for the destination
struct member having a neighboring array member. It is reasonable to
expect that the vast majority of run-time false positives would look like
the already evaluated and fixed compile-time false positives, where the
most common pattern is neighboring arrays. (And, FWIW, many of the
compile-time fixes were actual bugs, so it is reasonable to assume we'll
have similar cases of actual bugs getting fixed for run-time checks.)
Implementation:
Tighten the memcpy() destination buffer size checking to use the actual
("mode 1") target buffer size as the bounds check instead of their
enclosing structure's ("mode 0") size. Use a common inline for memcpy()
(and memmove() in a following patch), since all the tests are the
same. All new cross-field memcpy() uses must use the struct_group() macro
or similar to target a specific range of fields, so that FORTIFY_SOURCE
can reason about the size and safety of the copy.
For now, cross-member "mode 1" _read_ detection at compile-time will be
limited to W=1 builds, since it is, unfortunately, very common. As the
priority is solving write overflows, read overflows will be part of a
future phase (and can be fixed in parallel, for anyone wanting to look
at W=1 build output).
For run-time, the "mode 0" size checking and mitigation is left unchanged,
with "mode 1" to be added in stages. In this patch, no new run-time
checks are added. Future patches will first bounds-check writes,
and only perform a WARN() for now. This way any missed run-time false
positives can be flushed out over the coming several development cycles,
but system builders who have tested their workloads to be WARN()-free
can enable the panic_on_warn=1 sysctl to immediately gain a mitigation
against this class of buffer overflows. Once that is under way, run-time
bounds-checking of reads can be similarly enabled.
Related classes of flaws that will remain unmitigated:
- memcpy() with flexible array structures, as the compiler does not
currently have visibility into the size of the trailing flexible
array. These can be fixed in the future by refactoring such cases
to use a new set of flexible array structure helpers to perform the
common serialization/deserialization code patterns doing allocation
and/or copying.
- memcpy() with raw pointers (e.g. void *, char *, etc), or otherwise
having their buffer size unknown at compile time, have no good
mitigation beyond memory tagging (and even that would only protect
against inter-object overflow, not intra-object neighboring field
overflows), or refactoring. Some kind of "fat pointer" solution is
likely needed to gain proper size-of-buffer awareness. (e.g. see
struct membuf)
- type confusion where a higher level type's allocation size does
not match the resulting cast type eventually passed to a deeper
memcpy() call where the compiler cannot see the true type. In
theory, greater static analysis could catch these, and the use
of -Warray-bounds will help find some of these.
[0] https://gcc.gnu.org/onlinedocs/gcc/Object-Size-Checking.html
[1] https://git.kernel.org/linus/6a39e62abbafd1d58d1722f40c7d26ef379c6a2f
Signed-off-by: Kees Cook <keescook@chromium.org>
This change makes the PCHG driver receive device events through
MKBP protocol since CrOS EC switched to deliver all peripheral
charge events to the MKBP protocol. This will unify PCHG event
handling on X86 and ARM.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----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=+cTD
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
"Fix a case where objtool would mistakenly warn about instructions
being unreachable"
* tag 'objtool_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bug: Merge annotate_reachable() into _BUG_FLAGS() asm
With GCC 12, -Wstringop-overread was warning about an implicit cast from
char[6] to char[8]. However, the extra 2 bytes are always thrown away,
alignment doesn't matter, and the risk of hitting the edge of unallocated
memory has been accepted, so this prototype can just be converted to a
regular char *. Silences:
net/core/dev.c: In function ‘bpf_prog_run_generic_xdp’: net/core/dev.c:4618:21: warning: ‘ether_addr_equal_64bits’ reading 8 bytes from a region of size 6 [-Wstringop-overread]
4618 | orig_host = ether_addr_equal_64bits(eth->h_dest, > skb->dev->dev_addr);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/core/dev.c:4618:21: note: referencing argument 1 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’}
net/core/dev.c:4618:21: note: referencing argument 2 of type ‘const u8[8]’ {aka ‘const unsigned char[8]’}
In file included from net/core/dev.c:91: include/linux/etherdevice.h:375:20: note: in a call to function ‘ether_addr_equal_64bits’
375 | static inline bool ether_addr_equal_64bits(const u8 addr1[6+2],
| ^~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/netdev/20220212090811.uuzk6d76agw2vv73@pengutronix.de
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a x86-specific cpumask_clear_cpu() helper which will be used in
places where the explicit KASAN-instrumentation in the *_bit() helpers
is unwanted.
Also, always inline two more cpumask generic helpers.
allyesconfig:
text data bss dec hex filename
190553143 159425889 32076404 382055436 16c5b40c vmlinux.before
190551812 159424945 32076404 382053161 16c5ab29 vmlinux.after
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20220204083015.17317-2-bp@alien8.de
We switched users of the accessors over to using syscon to inspect
the bits, or removed the need for checking them. Delete these
accessors.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220211223238.648934-11-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
All IXP4xx platforms are converted to device tree, the platform
data path is no longer used. Drop the code and custom include,
confine the driver in its own file.
Depend on OF and remove ifdefs around this, as we are all probing
from OF now.
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220211223238.648934-9-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If we access the syscon (expansion bus config registers) using the
syscon regmap instead of relying on direct accessor functions,
we do not need to call this static code in the machine
(arch/arm/mach-ixp4xx/common.c) which makes things less dependent
on custom machine-dependent code.
Look up the syscon regmap and handle the error: this will make
deferred probe work with relation to the syscon.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220211223238.648934-8-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If we want to read the CFG2 register on the expansion bus and
apply the inversion and check for some hardcoded versions this
helper comes in handy.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220211223238.648934-7-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This board is replaced with the corresponding device tree.
Also delete dangling platform data file only used by this
boardfile and nothing else.
Cc: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220211223238.648934-3-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge misc fixes from Andrew Morton:
"5 patches.
Subsystems affected by this patch series: binfmt, procfs, and mm
(vmscan, memcg, and kfence)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kfence: make test case compatible with run time set sample interval
mm: memcg: synchronize objcg lists with a dedicated spinlock
mm: vmscan: remove deadlock due to throttling failing to make progress
fs/proc: task_mmu.c: don't read mapcount for migration entry
fs/binfmt_elf: fix PT_LOAD p_align values for loaders
Add resource owner management API, this API could be used to check
whether M4 is under control of Linux.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The parameter kfence_sample_interval can be set via boot parameter and
late shell command, which is convenient for automated tests and KFENCE
parameter optimization. However, KFENCE test case just uses
compile-time CONFIG_KFENCE_SAMPLE_INTERVAL, which will make KFENCE test
case not run as users desired. Export kfence_sample_interval, so that
KFENCE test case can use run-time-set sample interval.
Link: https://lkml.kernel.org/r/20220207034432.185532-1-liupeng256@huawei.com
Signed-off-by: Peng Liu <liupeng256@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian Knig <christian.koenig@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander reported a circular lock dependency revealed by the mmap1 ltp
test:
LOCKDEP_CIRCULAR (suite: ltp, case: mtest06 (mmap1))
WARNING: possible circular locking dependency detected
5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1 Not tainted
------------------------------------------------------
mmap1/202299 is trying to acquire lock:
00000001892c0188 (css_set_lock){..-.}-{2:2}, at: obj_cgroup_release+0x4a/0xe0
but task is already holding lock:
00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&sighand->siglock){-.-.}-{2:2}:
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
__lock_task_sighand+0x90/0x190
cgroup_freeze_task+0x2e/0x90
cgroup_migrate_execute+0x11c/0x608
cgroup_update_dfl_csses+0x246/0x270
cgroup_subtree_control_write+0x238/0x518
kernfs_fop_write_iter+0x13e/0x1e0
new_sync_write+0x100/0x190
vfs_write+0x22c/0x2d8
ksys_write+0x6c/0xf8
__do_syscall+0x1da/0x208
system_call+0x82/0xb0
-> #0 (css_set_lock){..-.}-{2:2}:
check_prev_add+0xe0/0xed8
validate_chain+0x736/0xb20
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
obj_cgroup_release+0x4a/0xe0
percpu_ref_put_many.constprop.0+0x150/0x168
drain_obj_stock+0x94/0xe8
refill_obj_stock+0x94/0x278
obj_cgroup_charge+0x164/0x1d8
kmem_cache_alloc+0xac/0x528
__sigqueue_alloc+0x150/0x308
__send_signal+0x260/0x550
send_signal+0x7e/0x348
force_sig_info_to_task+0x104/0x180
force_sig_fault+0x48/0x58
__do_pgm_check+0x120/0x1f0
pgm_check_handler+0x11e/0x180
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sighand->siglock);
lock(css_set_lock);
lock(&sighand->siglock);
lock(css_set_lock);
*** DEADLOCK ***
2 locks held by mmap1/202299:
#0: 00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
#1: 00000001892ad560 (rcu_read_lock){....}-{1:2}, at: percpu_ref_put_many.constprop.0+0x0/0x168
stack backtrace:
CPU: 15 PID: 202299 Comm: mmap1 Not tainted 5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
dump_stack_lvl+0x76/0x98
check_noncircular+0x136/0x158
check_prev_add+0xe0/0xed8
validate_chain+0x736/0xb20
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
obj_cgroup_release+0x4a/0xe0
percpu_ref_put_many.constprop.0+0x150/0x168
drain_obj_stock+0x94/0xe8
refill_obj_stock+0x94/0x278
obj_cgroup_charge+0x164/0x1d8
kmem_cache_alloc+0xac/0x528
__sigqueue_alloc+0x150/0x308
__send_signal+0x260/0x550
send_signal+0x7e/0x348
force_sig_info_to_task+0x104/0x180
force_sig_fault+0x48/0x58
__do_pgm_check+0x120/0x1f0
pgm_check_handler+0x11e/0x180
INFO: lockdep is turned off.
In this example a slab allocation from __send_signal() caused a
refilling and draining of a percpu objcg stock, resulted in a releasing
of another non-related objcg. Objcg release path requires taking the
css_set_lock, which is used to synchronize objcg lists.
This can create a circular dependency with the sighandler lock, which is
taken with the locked css_set_lock by the freezer code (to freeze a
task).
In general it seems that using css_set_lock to synchronize objcg lists
makes any slab allocations and deallocation with the locked css_set_lock
and any intervened locks risky.
To fix the problem and make the code more robust let's stop using
css_set_lock to synchronize objcg lists and use a new dedicated spinlock
instead.
Link: https://lkml.kernel.org/r/Yfm1IHmoGdyUR81T@carbon.dhcp.thefacebook.com
Fixes: bf4f059954 ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 7d2b5dd0bc ("sched/numa: Allow a floating imbalance between NUMA
nodes") allowed an imbalance between NUMA nodes such that communicating
tasks would not be pulled apart by the load balancer. This works fine when
there is a 1:1 relationship between LLC and node but can be suboptimal
for multiple LLCs if independent tasks prematurely use CPUs sharing cache.
Zen* has multiple LLCs per node with local memory channels and due to
the allowed imbalance, it's far harder to tune some workloads to run
optimally than it is on hardware that has 1 LLC per node. This patch
allows an imbalance to exist up to the point where LLCs should be balanced
between nodes.
On a Zen3 machine running STREAM parallelised with OMP to have on instance
per LLC the results and without binding, the results are
5.17.0-rc0 5.17.0-rc0
vanilla sched-numaimb-v6
MB/sec copy-16 162596.94 ( 0.00%) 580559.74 ( 257.05%)
MB/sec scale-16 136901.28 ( 0.00%) 374450.52 ( 173.52%)
MB/sec add-16 157300.70 ( 0.00%) 564113.76 ( 258.62%)
MB/sec triad-16 151446.88 ( 0.00%) 564304.24 ( 272.61%)
STREAM can use directives to force the spread if the OpenMP is new
enough but that doesn't help if an application uses threads and
it's not known in advance how many threads will be created.
Coremark is a CPU and cache intensive benchmark parallelised with
threads. When running with 1 thread per core, the vanilla kernel
allows threads to contend on cache. With the patch;
5.17.0-rc0 5.17.0-rc0
vanilla sched-numaimb-v5
Min Score-16 368239.36 ( 0.00%) 389816.06 ( 5.86%)
Hmean Score-16 388607.33 ( 0.00%) 427877.08 * 10.11%*
Max Score-16 408945.69 ( 0.00%) 481022.17 ( 17.62%)
Stddev Score-16 15247.04 ( 0.00%) 24966.82 ( -63.75%)
CoeffVar Score-16 3.92 ( 0.00%) 5.82 ( -48.48%)
It can also make a big difference for semi-realistic workloads
like specjbb which can execute arbitrary numbers of threads without
advance knowledge of how they should be placed. Even in cases where
the average performance is neutral, the results are more stable.
5.17.0-rc0 5.17.0-rc0
vanilla sched-numaimb-v6
Hmean tput-1 71631.55 ( 0.00%) 73065.57 ( 2.00%)
Hmean tput-8 582758.78 ( 0.00%) 556777.23 ( -4.46%)
Hmean tput-16 1020372.75 ( 0.00%) 1009995.26 ( -1.02%)
Hmean tput-24 1416430.67 ( 0.00%) 1398700.11 ( -1.25%)
Hmean tput-32 1687702.72 ( 0.00%) 1671357.04 ( -0.97%)
Hmean tput-40 1798094.90 ( 0.00%) 2015616.46 * 12.10%*
Hmean tput-48 1972731.77 ( 0.00%) 2333233.72 ( 18.27%)
Hmean tput-56 2386872.38 ( 0.00%) 2759483.38 ( 15.61%)
Hmean tput-64 2909475.33 ( 0.00%) 2925074.69 ( 0.54%)
Hmean tput-72 2585071.36 ( 0.00%) 2962443.97 ( 14.60%)
Hmean tput-80 2994387.24 ( 0.00%) 3015980.59 ( 0.72%)
Hmean tput-88 3061408.57 ( 0.00%) 3010296.16 ( -1.67%)
Hmean tput-96 3052394.82 ( 0.00%) 2784743.41 ( -8.77%)
Hmean tput-104 2997814.76 ( 0.00%) 2758184.50 ( -7.99%)
Hmean tput-112 2955353.29 ( 0.00%) 2859705.09 ( -3.24%)
Hmean tput-120 2889770.71 ( 0.00%) 2764478.46 ( -4.34%)
Hmean tput-128 2871713.84 ( 0.00%) 2750136.73 ( -4.23%)
Stddev tput-1 5325.93 ( 0.00%) 2002.53 ( 62.40%)
Stddev tput-8 6630.54 ( 0.00%) 10905.00 ( -64.47%)
Stddev tput-16 25608.58 ( 0.00%) 6851.16 ( 73.25%)
Stddev tput-24 12117.69 ( 0.00%) 4227.79 ( 65.11%)
Stddev tput-32 27577.16 ( 0.00%) 8761.05 ( 68.23%)
Stddev tput-40 59505.86 ( 0.00%) 2048.49 ( 96.56%)
Stddev tput-48 168330.30 ( 0.00%) 93058.08 ( 44.72%)
Stddev tput-56 219540.39 ( 0.00%) 30687.02 ( 86.02%)
Stddev tput-64 121750.35 ( 0.00%) 9617.36 ( 92.10%)
Stddev tput-72 223387.05 ( 0.00%) 34081.13 ( 84.74%)
Stddev tput-80 128198.46 ( 0.00%) 22565.19 ( 82.40%)
Stddev tput-88 136665.36 ( 0.00%) 27905.97 ( 79.58%)
Stddev tput-96 111925.81 ( 0.00%) 99615.79 ( 11.00%)
Stddev tput-104 146455.96 ( 0.00%) 28861.98 ( 80.29%)
Stddev tput-112 88740.49 ( 0.00%) 58288.23 ( 34.32%)
Stddev tput-120 186384.86 ( 0.00%) 45812.03 ( 75.42%)
Stddev tput-128 78761.09 ( 0.00%) 57418.48 ( 27.10%)
Similarly, for embarassingly parallel problems like NPB-ep, there are
improvements due to better spreading across LLC when the machine is not
fully utilised.
vanilla sched-numaimb-v6
Min ep.D 31.79 ( 0.00%) 26.11 ( 17.87%)
Amean ep.D 31.86 ( 0.00%) 26.17 * 17.86%*
Stddev ep.D 0.07 ( 0.00%) 0.05 ( 24.41%)
CoeffVar ep.D 0.22 ( 0.00%) 0.20 ( 7.97%)
Max ep.D 31.93 ( 0.00%) 26.21 ( 17.91%)
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20220208094334.16379-3-mgorman@techsingularity.net
- Revert a recent change that attempted to avoid issues with
conflicting address ranges during PCI initialization, because it
turned out to introduce a regression (Hans de Goede).
- Revert a change that limited EC GPE wakeups from suspend-to-idle
to systems based on Intel hardware, because it turned out that
systems based on hardware from other vendors depended on that
functionality too (Mario Limonciello).
- Fix two issues related to the handling of wakeup interrupts and
wakeup events signaled through the EC GPE during suspend-to-idle
on x86 (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=aGYp
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert two commits that turned out to be problematic and fix two
issues related to wakeup from suspend-to-idle on x86.
Specifics:
- Revert a recent change that attempted to avoid issues with
conflicting address ranges during PCI initialization, because it
turned out to introduce a regression (Hans de Goede).
- Revert a change that limited EC GPE wakeups from suspend-to-idle to
systems based on Intel hardware, because it turned out that systems
based on hardware from other vendors depended on that functionality
too (Mario Limonciello).
- Fix two issues related to the handling of wakeup interrupts and
wakeup events signaled through the EC GPE during suspend-to-idle on
x86 (Rafael Wysocki)"
* tag 'acpi-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/PCI: revert "Ignore E820 reservations for bridge windows on newer systems"
PM: s2idle: ACPI: Fix wakeup interrupts handling
ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE
ACPI: PM: Revert "Only mark EC GPE for wakeup on Intel systems"
Partition include/linux/blk-cgroup.h into two parts: one is public part,
the other is block layer private part.
Suggested by Christoph Hellwig.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220211101149.2368042-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
First set of patches for v5.18, with both wireless and stack patches.
rtw89 now has AP mode support and wcn36xx has survey support. But
otherwise pretty normal.
Major changes:
ath11k
* add LDPC FEC type in 802.11 radiotap header
* enable RX PPDU stats in monitor co-exist mode
wcn36xx
* implement survey reporting
brcmfmac
* add CYW43570 PCIE device
rtw88
* rtw8821c: enable RFE 6 devices
rtw89
* AP mode support
mt76
* mt7916 support
* background radar detection support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmIGLrkRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZsgWAf/aQb18PB2Wh+tH4qxkNW6jK3zfYSRDbDQ
QvrHcnN4BINorTLcGDvWqw3VANiETCW6mVBG8BWo1NyAlvkNziKaAFI3xVhuOE38
6d+wRVElG9JHeb6OwWCX2vWJmqWVxmEIAkTQrqT9VSSUjGDpS1mc3dAssABeEZhn
yzSKJomSRaRv/aC2f/4eYPAyeMUIZbN3VWFOvElGPls0mdrSBmt9OhAKkf3A3E0M
PuJzhnHgoKhpZ/Gmn+IrDZGC/RkUOfT2zZ5gUK0GVvpTFg2/80ilC7RJk2iF5Ibs
xGuRN9WSo9xWILF3SyRgrrx3ocZG0H2dvkJj4ZQbR485U8iXa+HC1g==
=AUlw
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-02-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
wireless-next patches for v5.18
First set of patches for v5.18, with both wireless and stack patches.
rtw89 now has AP mode support and wcn36xx has survey support. But
otherwise pretty normal.
Major changes:
ath11k
* add LDPC FEC type in 802.11 radiotap header
* enable RX PPDU stats in monitor co-exist mode
wcn36xx
* implement survey reporting
brcmfmac
* add CYW43570 PCIE device
rtw88
* rtw8821c: enable RFE 6 devices
rtw89
* AP mode support
mt76
* mt7916 support
* background radar detection support
This patch aims to add dynamic control for SMC handshake limitation for
every smc sockets, in production environment, it is possible for the
same applications to handle different service types, and may have
different opinion on SMC handshake limitation.
This patch try socket options to complete it, since we don't have socket
option level for SMC yet, which requires us to implement it at the same
time.
This patch does the following:
- add new socket option level: SOL_SMC.
- add new SMC socket option: SMC_LIMIT_HS.
- provide getter/setter for SMC socket options.
Link: https://lore.kernel.org/all/20f504f961e1a803f85d64229ad84260434203bd.1644323503.git.alibuda@linux.alibaba.com/
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch intends to provide a mechanism to put constraint on SMC
connections visit according to the pressure of SMC handshake process.
At present, frequent visits will cause the incoming connections to be
backlogged in SMC handshake queue, raise the connections established
time. Which is quite unacceptable for those applications who base on
short lived connections.
There are two ways to implement this mechanism:
1. Put limitation after TCP established.
2. Put limitation before TCP established.
In the first way, we need to wait and receive CLC messages that the
client will potentially send, and then actively reply with a decline
message, in a sense, which is also a sort of SMC handshake, affect the
connections established time on its way.
In the second way, the only problem is that we need to inject SMC logic
into TCP when it is about to reply the incoming SYN, since we already do
that, it's seems not a problem anymore. And advantage is obvious, few
additional processes are required to complete the constraint.
This patch use the second way. After this patch, connections who beyond
constraint will not informed any SMC indication, and SMC will not be
involved in any of its subsequent processes.
Link: https://lore.kernel.org/all/1641301961-59331-1-git-send-email-alibuda@linux.alibaba.com/
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It has been said that local_lock() does not add any overhead compared to
preempt_disable() in a !LOCKDEP configuration. A micro benchmark showed
an unexpected result which can be reduced to the fact that local_lock()
was not entirely optimized away.
In the !LOCKDEP configuration local_lock_acquire() is an empty static
inline function. On x86 the this_cpu_ptr() argument of that function is
fully evaluated leading to an additional mov+add instructions which are
not needed and not used.
Replace the static inline function with a macro. The typecheck() macro
ensures that the argument is of proper type while the resulting
disassembly shows no traces of this_cpu_ptr().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/YgKjciR60fZft2l4@linutronix.de
Arnd reports that on 32-bit architectures, the fallbacks for
atomic64_read_acquire() and atomic64_set_release() are broken as they
use smp_load_acquire() and smp_store_release() respectively, which do
not work on types larger than the native word size.
Since those contain compiletime_assert_atomic_type(), any attempt to use
those fallbacks will result in a build-time error. e.g. with the
following added to arch/arm/kernel/setup.c:
| void test_atomic64(atomic64_t *v)
| {
| atomic64_set_release(v, 5);
| atomic64_read_acquire(v);
| }
The compiler will complain as follows:
| In file included from <command-line>:
| In function 'arch_atomic64_set_release',
| inlined from 'test_atomic64' at ./include/linux/atomic/atomic-instrumented.h:669:2:
| ././include/linux/compiler_types.h:346:38: error: call to '__compiletime_assert_9' declared with attribute error: Need native word sized stores/loads for atomicity.
| 346 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| | ^
| ././include/linux/compiler_types.h:327:4: note: in definition of macro '__compiletime_assert'
| 327 | prefix ## suffix(); \
| | ^~~~~~
| ././include/linux/compiler_types.h:346:2: note: in expansion of macro '_compiletime_assert'
| 346 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| | ^~~~~~~~~~~~~~~~~~~
| ././include/linux/compiler_types.h:349:2: note: in expansion of macro 'compiletime_assert'
| 349 | compiletime_assert(__native_word(t), \
| | ^~~~~~~~~~~~~~~~~~
| ./include/asm-generic/barrier.h:133:2: note: in expansion of macro 'compiletime_assert_atomic_type'
| 133 | compiletime_assert_atomic_type(*p); \
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| ./include/asm-generic/barrier.h:164:55: note: in expansion of macro '__smp_store_release'
| 164 | #define smp_store_release(p, v) do { kcsan_release(); __smp_store_release(p, v); } while (0)
| | ^~~~~~~~~~~~~~~~~~~
| ./include/linux/atomic/atomic-arch-fallback.h:1270:2: note: in expansion of macro 'smp_store_release'
| 1270 | smp_store_release(&(v)->counter, i);
| | ^~~~~~~~~~~~~~~~~
| make[2]: *** [scripts/Makefile.build:288: arch/arm/kernel/setup.o] Error 1
| make[1]: *** [scripts/Makefile.build:550: arch/arm/kernel] Error 2
| make: *** [Makefile:1831: arch/arm] Error 2
Fix this by only using smp_load_acquire() and smp_store_release() for
native atomic types, and otherwise falling back to the regular barriers
necessary for acquire/release semantics, as we do in the more generic
acquire and release fallbacks.
Since the fallback templates are used to generate the atomic64_*() and
atomic_*() operations, the __native_word() check is added to both. For
the atomic_*() operations, which are always 32-bit, the __native_word()
check is redundant but not harmful, as it is always true.
For the example above this works as expected on 32-bit, e.g. for arm
multi_v7_defconfig:
| <test_atomic64>:
| push {r4, r5}
| dmb ish
| pldw [r0]
| mov r2, #5
| mov r3, #0
| ldrexd r4, [r0]
| strexd r4, r2, [r0]
| teq r4, #0
| bne 484 <test_atomic64+0x14>
| ldrexd r2, [r0]
| dmb ish
| pop {r4, r5}
| bx lr
... and also on 64-bit, e.g. for arm64 defconfig:
| <test_atomic64>:
| bti c
| paciasp
| mov x1, #0x5
| stlr x1, [x0]
| ldar x0, [x0]
| autiasp
| ret
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20220207101943.439825-1-mark.rutland@arm.com
Modern compilers are perfectly capable of extracting parallelism from
the XOR routines, provided that the prototypes reflect the nature of the
input accurately, in particular, the fact that the input vectors are
expected not to overlap. This is not documented explicitly, but is
implied by the interchangeability of the various C routines, some of
which use temporary variables while others don't: this means that these
routines only behave identically for non-overlapping inputs.
So let's decorate these input vectors with the __restrict modifier,
which informs the compiler that there is no overlap. While at it, make
the input-only vectors pointer-to-const as well.
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/563
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
------------------------
dma-buf:
- dma-buf-map: Rename to iosys-map (Lucas)
Core Changes:
-------------
drm:
- Always include the debugfs_entry in drm_crtc (Ville)
- Add orientation quirk for GPD Win Max (Anisse)
Driver Changes:
---------------
gvt:
- Constify some pointers. (Rikard Falkeborn)
- Use list_entry to access list members. (Guenter Roeck)
- Fix cmd parser error for Passmark9. (Zhenyu Wang)
i915:
- Various clean-ups including headers and removing unused and unnecessary stuff\
(Jani, Hans, Andy, Ville)
- Cleaning up on our registers definitions i915_reg.h (Matt)
- More multi-FBC refactoring (Ville)
- Baytrail backlight fix (Hans)
- DG1 OPROM read through SPI controller (Clint)
- ADL-N platform enabling (Tejas)
- Fix slab-out-of-bounds access (Jani)
- Add opregion mailbox #5 support for possible EDID override (Anisse)
- Fix possible NULL dereferences (Harish)
- Updates and fixes around display voltage swing values (Clint, Jose)
- Fix RPM wekeref on PXP code (Juston)
- Many register definitions clean-up, including planes registers (Ville)
- More conversion towards display version over the old gen (Madhumitha, Ville)
- DP MST ESI handling improvements (Jani)
- drm device based logging conversions (Jani)
- Prevent divide by zero (Dan)
- Introduce ilk_pch_pre_enable for complete modeset abstraction (Ville)
- Async flip optimization for DG2 (Stanislav)
- Multiple DSC and bigjoiner fixes and improvements (Ville)
- Fix ADL-P TypeC Phy ready status readout (Imre)
- Fix up DP DFP 4:2:0 handling more display related fixes (Ville)
- Display M/N cleanup (Ville)
- Switch to use VGA definitions from video/vga.h (Jani)
- Fixes and improvements to abstract CPU architecture (Lucas)
- Disable unsused power wells left enabled by BIOS (Imre)
- Allow !join_mbus cases for adlp+ dbuf configuration (Ville)
- Populate pipe dbuf slices more accurately during readout (Ville)
- Workaround broken BIOS DBUF configuration on TGL/RKL (Ville)
- Fix trailing semicolon (Lucas)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmIChLkACgkQ+mJfZA7r
E8rDOgf9GdgD5PIqly1zCjfpN0z15KXS6kn6lDlthcZMQ2INpAjfo7sOhpAdcb5h
ptoKkBxD0p+VlLWTR14+N1/DXV8lvxgdfbee2XHdG2+750eBjcjdYNakDj+lGZJ6
AVO5pNJRa6WEMd4pesm53CJMHlgSzydRCl66PobHrqqeHahO4VGh4Y9jqoJ3JzvD
unO1iWrss/i9HvJrefcrUKPGkpb9u59dzsiM9Q3rCNSsPg3ik7Mz1LLPEyHEHyUi
7vs8ugjN2UiZZELnMJIiCBwHs1xN0O3oS4YkjjTzZXMWc+cvY9mFpGbIWMffYpMY
qijXJLO8Fh57SN0G6EPaCjNyQbm8Gw==
=/7VU
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2022-02-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Cross-subsystem Changes:
------------------------
dma-buf:
- dma-buf-map: Rename to iosys-map (Lucas)
Core Changes:
-------------
drm:
- Always include the debugfs_entry in drm_crtc (Ville)
- Add orientation quirk for GPD Win Max (Anisse)
Driver Changes:
---------------
gvt:
- Constify some pointers. (Rikard Falkeborn)
- Use list_entry to access list members. (Guenter Roeck)
- Fix cmd parser error for Passmark9. (Zhenyu Wang)
i915:
- Various clean-ups including headers and removing unused and unnecessary stuff\
(Jani, Hans, Andy, Ville)
- Cleaning up on our registers definitions i915_reg.h (Matt)
- More multi-FBC refactoring (Ville)
- Baytrail backlight fix (Hans)
- DG1 OPROM read through SPI controller (Clint)
- ADL-N platform enabling (Tejas)
- Fix slab-out-of-bounds access (Jani)
- Add opregion mailbox #5 support for possible EDID override (Anisse)
- Fix possible NULL dereferences (Harish)
- Updates and fixes around display voltage swing values (Clint, Jose)
- Fix RPM wekeref on PXP code (Juston)
- Many register definitions clean-up, including planes registers (Ville)
- More conversion towards display version over the old gen (Madhumitha, Ville)
- DP MST ESI handling improvements (Jani)
- drm device based logging conversions (Jani)
- Prevent divide by zero (Dan)
- Introduce ilk_pch_pre_enable for complete modeset abstraction (Ville)
- Async flip optimization for DG2 (Stanislav)
- Multiple DSC and bigjoiner fixes and improvements (Ville)
- Fix ADL-P TypeC Phy ready status readout (Imre)
- Fix up DP DFP 4:2:0 handling more display related fixes (Ville)
- Display M/N cleanup (Ville)
- Switch to use VGA definitions from video/vga.h (Jani)
- Fixes and improvements to abstract CPU architecture (Lucas)
- Disable unsused power wells left enabled by BIOS (Imre)
- Allow !join_mbus cases for adlp+ dbuf configuration (Ville)
- Populate pipe dbuf slices more accurately during readout (Ville)
- Workaround broken BIOS DBUF configuration on TGL/RKL (Ville)
- Fix trailing semicolon (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YgKFLmCgpv4vQEa1@intel.com
