It is quite unusual when some value can not be equal to a defined range
max value. Also most subsystems defines FOO_TYPE_MAX as a maximum valid
value. So turn the WAN_PORT_MAX meaning from the number of supported
port types to the maximum valid port type.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Intel mGbE supports 2.5Gbps link speed by increasing the clock rate by
2.5 times of the original rate. In this mode, the serdes/PHY operates at a
serial baud rate of 3.125 Gbps and the PCS data path and GMII interface of
the MAC operate at 312.5 MHz instead of 125 MHz.
For Intel mGbE, the overclocking of 2.5 times clock rate to support 2.5G is
only able to be configured in the BIOS during boot time. Kernel driver has
no access to modify the clock rate for 1Gbps/2.5G mode. The way to
determined the current 1G/2.5G mode is by reading a dedicated adhoc
register through mdio bus. In short, after the system boot up, it is either
in 1G mode or 2.5G mode which not able to be changed on the fly.
Compared to 1G mode, the 2.5G mode selects the 2500BASEX as PHY interface and
disables the xpcs_an_inband. This is to cater for some PHYs that only
supports 2500BASEX PHY interface with no autonegotiation.
v2: remove MAC supported link speed masking
v3: Restructure to introduce intel_speed_mode_2500() to read serdes registers
for max speed supported and select the appropritate configuration.
Use max_speed to determine the supported link speed mask.
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
XPCS IP supports 2500BASEX as PHY interface. It is configured as
autonegotiation disable to cater for PHYs that does not supports 2500BASEX
autonegotiation.
v2: Add supported link speed masking.
v3: Restructure to introduce xpcs_config_2500basex() used to configure the
xpcs for 2.5G speeds. Added 2500BASEX specific information for
configuration.
v4: Fix indentation error
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Up to now several high speed NICs have custom mechanisms of recycling
the allocated memory they use for their payloads.
Our page_pool API already has recycling capabilities that are always
used when we are running in 'XDP mode'. So let's tweak the API and the
kernel network stack slightly and allow the recycling to happen even
during the standard operation.
The API doesn't take into account 'split page' policies used by those
drivers currently, but can be extended once we have users for that.
The idea is to be able to intercept the packet on skb_release_data().
If it's a buffer coming from our page_pool API recycle it back to the
pool for further usage or just release the packet entirely.
To achieve that we introduce a bit in struct sk_buff (pp_recycle:1) and
a field in struct page (page->pp) to store the page_pool pointer.
Storing the information in page->pp allows us to recycle both SKBs and
their fragments.
We could have skipped the skb bit entirely, since identical information
can bederived from struct page. However, in an effort to affect the free path
as less as possible, reading a single bit in the skb which is already
in cache, is better that trying to derive identical information for the
page stored data.
The driver or page_pool has to take care of the sync operations on it's own
during the buffer recycling since the buffer is, after opting-in to the
recycling, never unmapped.
Since the gain on the drivers depends on the architecture, we are not
enabling recycling by default if the page_pool API is used on a driver.
In order to enable recycling the driver must call skb_mark_for_recycle()
to store the information we need for recycling in page->pp and
enabling the recycling bit, or page_pool_store_mem_info() for a fragment.
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Co-developed-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a prerequisite patch, the next one is enabling recycling of
skbs and fragments. Add an extra argument on __skb_frag_unref() to
handle recycling, and update the current users of the function with that.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is needed by the page_pool to avoid recycling a page not allocated
via page_pool.
The page->signature field is aliased to page->lru.next and
page->compound_head, but it can't be set by mistake because the
signature value is a bad pointer, and can't trigger a false positive
in PageTail() because the last bit is 0.
Co-developed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-06-07
This series contains updates to virtchnl header file and ice driver.
Brett adds capability bits to virtchnl to specify whether a primary or
secondary MAC address is being requested and adds the implementation to
ice. He also adds storing of VF MAC address so that it will be preserved
across reboots of VM and refactors VF queue configuration to remove the
expectation that configuration be done all at once.
Krzysztof refactors ice_setup_rx_ctx() to remove configuration not
related to Rx context into a new function, ice_vsi_cfg_rxq().
Liwei Song extends the wait time for the global config timeout.
Salil Mehta refactors code in ice_vsi_set_num_qs() to remove an
unnecessary call when the user has requested specific number of Rx or Tx
queues.
Jesse converts define macros to static inlines for NOP configurations.
Jake adds messaging when devlink fails to read device capabilities and
when pldmfw cannot find the requested firmware. Adds a wait for reset
completion when reporting devlink info and reinitializes NVM during
rebuild to ensure values are current.
Ani adds detection and reporting of modules exceeding supported power
levels and changes an error message to a debug message.
Paul fixes a clang warning for deadcode.DeadStores.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The "reverse RMII" protocol name is a personal invention, derived from
"reverse MII".
Just like MII, RMII is an asymmetric protocol in that a PHY behaves
differently than a MAC. In the case of RMII, for example:
- the 50 MHz clock signals are either driven by the MAC or by an
external oscillator (but never by the PHY).
- the PHY can transmit extra in-band control symbols via RXD[1:0] which
the MAC is supposed to understand, but a PHY isn't.
The "reverse MII" protocol is not standardized either, except for this
web document:
https://www.eetimes.com/reverse-media-independent-interface-revmii-block-architecture/#
In short, it means that the Ethernet controller speaks the 4-bit data
parallel protocol from the perspective of a PHY (it acts like a PHY).
This might mean that it implements clause 22 compatible registers,
although that is optional - the important bit is that its pins can be
connected to an MII MAC and it will 'just work'.
In this discussion thread:
https://lore.kernel.org/netdev/20210201214515.cx6ivvme2tlquge2@skbuf/
we agreed that it would be an abuse of terms to use the "RevMII" name
for anything than the 4-bit parallel MII protocol. But since all the
same concepts can be applied to the 2-bit Reduced MII protocol as well,
here we are introducing a "Reverse RMII" protocol. This means: "behave
like an RMII PHY".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, there is no way for a VF driver to specify that it wants to
change its device/primary unicast MAC address. This makes it
difficult/impossible for the PF driver to track the VF's device/primary
unicast MAC address, which is used for VM/VF reboot and displaying on
the host. Fix this by using 2 bits of a pad byte in the
virtchnl_ether_addr structure so the VF can specify what type of MAC
it's adding/deleting.
Below are the values that should be used by all VF drivers going
forward.
VIRTCHNL_ETHER_ADDR_LEGACY(0):
- The type should only ever be 0 for legacy AVF drivers (i.e.
drivers that don't support the new type bits). The PF drivers
will track VF's device/primary unicast MAC, but this will only
be a best effort.
VIRTCHNL_ETHER_ADDR_PRIMARY(1):
- This type should only be used when the VF is changing their
device/primary unicast MAC. It should be used for both delete
and add cases related to the device/primary unicast MAC.
VIRTCHNL_ETHER_ADDR_EXTRA(2):
- This type should be used when the VF is adding and/or deleting
MAC addresses that are not the device/primary unicast MAC. For
example, extra unicast addresses and multicast addresses
assuming the PF supports "extra" addresses at all.
If a PF is parsing the type field of the virtchnl_ether_addr, then it
should use the VIRTCHNL_ETHER_ADDR_TYPE_MASK to mask the first two bits
of the type field since 0, 1, and 2 are the only valid values.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
On m68k (Coldfire M547x):
CC drivers/net/ethernet/intel/i40e/i40e_main.o
In file included from drivers/net/ethernet/intel/i40e/i40e_prototype.h:9,
from drivers/net/ethernet/intel/i40e/i40e.h:41,
from drivers/net/ethernet/intel/i40e/i40e_main.c:12:
include/linux/avf/virtchnl.h:153:36: warning: division by zero [-Wdiv-by-zero]
153 | { virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
| ^
include/linux/avf/virtchnl.h:844:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/avf/virtchnl.h:844:33: error: enumerator value for ‘virtchnl_static_assert_virtchnl_proto_hdrs’ is not an integer constant
844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
| ^~~~~~~~~~~~~~~~~~~
On m68k, integers are aligned on addresses that are multiples of two,
not four, bytes. Hence the size of a structure containing integers may
not be divisible by 4.
Fix this by adding explicit padding.
Fixes: 1f7ea1cd6a ("ice: Enable FDIR Configure for AVF")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This series contains misc updates for mlx5 driver
1) Alaa disables advanced features when kdump mode to save on memory
2) Jakub counts all link flap events
3) Meir adds support for IPoIB NDR speed
4) Various misc cleanup
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmC5Ny0ACgkQSD+KveBX
+j4ZhQgAs71PeGPSvxdwIylXje3ZcQq5dubLdiVNOKiuRd9JOfc0hlvfXU6qDHOM
t0zOYM/vR2S43zEv+lx6xT0gYivoR8Yqng18T8ImAoO1I43gQDvtHgdVrcyFPRmy
vAm/vxQl8L9Skd7PELmZdKlgzYdgfF3+craqGgkBz3D1zsZ3cAxh5O+b7LCnD8Pt
D/44chJTDLMoPE/36zY7NyzByvxrXiCC6sGq5RIxNWkvy73c4JXTSrPN4te8QzpB
yTYn56UDSPJ8ENLP8TBJ7HhmyOgrCoun1X9LHTqAVE3cGUbdcWjgBHTgei22k691
3iep8YpiN28bj8AtklzwwVVCy+VIPQ==
=FbSJ
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
This series provides misc updates for mlx5 drivers.
For more information please see tag log below.
Please pull and let me know if there is any problem.
mlx5-updates-2021-06-03
This series contains misc updates for mlx5 driver
1) Alaa disables advanced features when kdump mode to save on memory
2) Jakub counts all link flap events
3) Meir adds support for IPoIB NDR speed
4) Various misc cleanup
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces APIs which the NVMeTCP Offload device (qedn)
will use through the paired net-device (qede).
It includes APIs for:
- ipv4/ipv6 routing
- get VLAN from net-device
- TCP ports reservation
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Nikolay Assa <nassa@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces the NVMeTCP FW initializations which is used
to initialize the IO level configuration into a per IO HW
resource ("task") as part of the IO path flow.
This includes:
- Write IO FW initialization
- Read IO FW initialization.
- IC-Req and IC-Resp FW exchange.
- FW Cleanup flow (Flush IO).
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces the NVMeTCP Offload FW and HW HSI in order
to initialize the IO level configuration into a per IO HW
resource ("task") as part of the IO path flow.
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces the functionality of HW filter block.
It adds and removes filters based on source and target TCP port.
It also add functionality to clear all filters at once.
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces the NVMeTCP HSI and HSI functionality in order to
initialize and interact with the HW device as part of the connection level
HSI.
This includes:
- Connection offload: offload a TCP connection to the FW.
- Connection update: update the ICReq-ICResp params
- Connection clear SQ: outstanding IOs FW flush.
- Connection termination: terminate the TCP connection and flush the FW.
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces the NVMeTCP device and PF level HSI and HSI
functionality in order to initialize and interact with the HW device.
The patch also adds qed NVMeTCP personality.
This patch is based on the qede, qedr, qedi, qedf drivers HSI.
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Dean Balandin <dbalandin@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add TCP_ULP as a storage common TCP offload FW resource layout.
This will be used by the core driver (QED) for both the NVMeTCP and iSCSI.
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since all the remaining members of struct mdio_xpcs_ops have direct
equivalents in struct phylink_pcs_ops, it is about time we remove it
altogether.
Since the phylink ops return void, we need to remove the error
propagation from the various xpcs methods and simply print an error
message where appropriate.
Since xpcs_get_state_c73() detects link faults and attempts to reset the
link on its own by calling xpcs_config(), but xpcs_config() now has a
lot of phylink arguments which are not needed and cannot be simply
fabricated by anybody else except phylink, the actual implementation has
been moved into a smaller xpcs_do_config().
The const struct mdio_xpcs_ops *priv->hw->xpcs has been removed, so we
need to look at the struct mdio_xpcs_args pointer now as an indication
whether the port has an XPCS or not.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unify the 2 existing PCS drivers (lynx and xpcs) by doing a similar
thing on probe, which is to have a *_create function that takes a
struct mdio_device * given by the caller, and builds a private PCS
structure around that.
This changes stmmac to hold only a pointer to the xpcs, as opposed to
the full structure. This will be used in the next patch when struct
mdio_xpcs_ops is removed. Currently a pointer to struct mdio_xpcs_ops
is used as a shorthand to determine whether the port has an XPCS or not.
We can do the same now with the mdio_xpcs_args pointer.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the other recently functions, it is not necessary for
xpcs_probe to be a function pointer, so export it so that it can be
called directly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no good reason why we need to go through:
stmmac_xpcs_config_eee
-> stmmac_do_callback
-> mdio_xpcs_ops->config_eee
-> xpcs_config_eee
when we can simply call xpcs_config_eee.
priv->hw->xpcs is of the type "const struct mdio_xpcs_ops *" and is used
as a placeholder/synonym for priv->plat->mdio_bus_data->has_xpcs. It is
done that way because the mdio_bus_data pointer might or might not be
populated in all stmmac instantiations.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling a function pointer with a single implementation through
struct mdio_xpcs_ops is clunky, and the stmmac_do_callback system forces
this to return int, even though it always returns zero.
Simply remove the "validate" function pointer from struct mdio_xpcs_ops
and replace it with an exported xpcs_validate symbol which is called
directly by stmmac.
priv->hw->xpcs is of the type "const struct mdio_xpcs_ops *" and is used
as a placeholder/synonym for priv->plat->mdio_bus_data->has_xpcs. It is
done that way because the mdio_bus_data pointer might or might not be
populated in all stmmac instantiations.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The operating mode of the driver is currently to populate its
struct mdio_xpcs_args::supported and struct mdio_xpcs_args::an_mode
statically in xpcs_probe(), based on the passed phy_interface_t,
and work with those.
However this is not the operation that phylink expects from a PCS
driver, because the port might be attached to an SFP cage that triggers
changes of the phy_interface_t dynamically as one SFP module is
unpluggged and another is plugged.
To migrate towards that model, the struct mdio_xpcs_args should not
cache anything related to the phy_interface_t, but just look up the
statically defined, const struct xpcs_compat structure corresponding to
the detected PCS OUI/model number.
So we delete the "supported" and "an_mode" members of struct
mdio_xpcs_args, and add the "id" structure there (since the ID is not
expected to change at runtime).
Since xpcs->supported is used deep in the code in _xpcs_config_aneg_c73(),
we need to modify some function headers to pass the xpcs_compat from all
callers. In turn, the xpcs_compat is always supplied externally to the
xpcs module:
- Most of the time by phylink
- In xpcs_probe() it is needed because xpcs_soft_reset() writes to
MDIO_MMD_PCS or to MDIO_MMD_VEND2 depending on whether an_mode is clause
37 or clause 73. In order to not introduce functional changes related
to when the soft reset is issued, we continue to require the initial
phy_interface_t argument to be passed to xpcs_probe() so we can pass
this on to xpcs_soft_reset().
- stmmac_open() wants to know whether to call stmmac_init_phy() or not,
and for that it looks inside xpcs->an_mode, because the clause 73
(backplane) AN modes supposedly do not have a PHY. Because we moved
an_mode outside of struct mdio_xpcs_args, this is now no longer
directly possible, so we introduce a helper function xpcs_get_an_mode()
which protects the data encapsulation of the xpcs module and requires
a phy_interface_t to be passed as argument. This function can look up
the appropriate compat based on the phy_interface_t.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CONFIG_STMMAC_ETH selects CONFIG_PCS_XPCS, so there should be no
situation where the shim should be needed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlx5 devices were observed generating MLX5_PORT_CHANGE_SUBTYPE_ACTIVE
events without an intervening MLX5_PORT_CHANGE_SUBTYPE_DOWN. This
breaks link flap detection based on Linux carrier state transition
count as netif_carrier_on() does nothing if carrier is already on.
Make sure we count such events.
netif_carrier_event() increments the counters and fires the linkwatch
events. The latter is not necessary for the use case but seems like
the right thing to do.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Flow table that contains flow pointing to multiple flow tables or multiple
TIRs must have a level lower than 64. In our case it applies to muli-
destination flow table.
Fix the level of the created table to comply with HW Spec definitions, and
still make sure that its level lower than SW-owned tables, so that it
would be possible to point from the multi-destination FW table to SW
tables.
Fixes: 34583beea4 ("net/mlx5: DR, Create multi-destination table for SW-steering use")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Support for SCTP chunks matching on nf_tables, from Phil Sutter.
2) Skip LDMXCSR, we don't need a valid MXCSR state. From Stefano Brivio.
3) CONFIG_RETPOLINE for nf_tables set lookups, from Florian Westphal.
4) A few Kconfig leading spaces removal, from Juerg Haefliger.
5) Remove spinlock from xt_limit, from Jason Baron.
6) Remove useless initialization in xt_CT, oneliner from Yang Li.
7) Tree-wide replacement of netlink_unicast() by nfnetlink_unicast().
8) Reduce footprint of several structures: xt_action_param,
nft_pktinfo and nf_hook_state, from Florian.
10) Add nft_thoff() and nft_sk() helpers and use them, also from Florian.
11) Fix documentation in nf_tables pipapo avx2, from Florian Westphal.
12) Fix clang-12 fmt string warnings, also from Florian.
====================
Adding support for processing of MAPv5 downlink packets.
It involves parsing the Mapv5 packet and checking the csum header
to know whether the hardware has validated the checksum and is
valid or not.
Based on the checksum valid bit the corresponding stats are
incremented and skb->ip_summed is marked either CHECKSUM_UNNECESSARY
or left as CHEKSUM_NONE to let network stack revalidate the checksum
and update the respective snmp stats.
Current MAPV1 header has been modified, the reserved field in the
Mapv1 header is now used for next header indication.
Signed-off-by: Sharath Chandra Vurukala <sharathv@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
iwl-next Intel Wired LAN Driver Updates 2021-06-01
This pull request is targeting net-next and rdma-next branches.
These patches have been reviewed by netdev and rdma mailing lists[1].
This series adds RDMA support to the ice driver for E810 devices and
converts the i40e driver to use the auxiliary bus infrastructure
for X722 devices. The PCI netdev drivers register auxiliary RDMA devices
that will bind to auxiliary drivers registered by the new irdma module.
[1] https://lore.kernel.org/netdev/20210520143809.819-1-shiraz.saleem@intel.com/
---
v3:
- ice_aq_add_rdma_qsets(), ice_cfg_vsi_rdma(), ice_[ena|dis]_vsi_rdma_qset(),
and ice_cfg_rdma_fltr() no longer return ice_status
- Remove null check from ice_aq_add_rdma_qsets()
v2:
- Added patch 'i40e: Replace one-element array with flexible-array
member'
Changes since linked review (v6):
- Removed unnecessary checks in i40e_client_device_register() and
i40e_client_device_unregister()
- Simplified the i40e_client_device_register() API
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On Intel platforms, not all safety features are enabled on the hardware.
The current implementation enable all safety features by default. This
will cause mass error and warning printouts after the module is loaded.
Introduce platform specific safety features flag to enable or disable
each safety features.
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the definitions to the i40e client header file in
preparation to convert i40e to use the new auxiliary bus
infrastructure. This header is shared between the 'i40e'
Intel networking driver providing RDMA support and the
'irdma' driver.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Introduce a shared header file used by the 'ice' Intel networking driver
providing RDMA support and the 'irdma' driver to provide a private
interface.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reduce size from 28 to 24 bytes on 32bit platforms.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The fragment offset in ipv4/ipv6 is a 16bit field, so use
u16 instead of unsigned int.
On 64bit: 40 bytes to 32 bytes. By extension this also reduces
nft_pktinfo (56 to 48 byte).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Misc update for mlx5 driver,
1) Clean up patches for lag and SF
2) Reserve bit 31 in steering register C1 for IPSec offload usage
3) Move steering tables pool logic into the steering core and
increase the maximum table size to 2G entries when software steering
is enabled.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmCv6vAACgkQSD+KveBX
+j6qnAgAz0eKWKCsFCqlXGIgF1cg3FrGR5W2Zi5euriHhHwNqnZof3AIMkzcXjLL
wBlPjWk3YLfBaBNPTziz6EJuGl1vZZxuSdc7bqsNnl0srujRtQFu3JyerdgXEXNL
W2NxjSTiVwu8lq2qlYauQvcE0v+JrB/LMe9tvq1UQ2v9FtBMMhs9hGUSCro2huwj
XYF0m0ve89+mYlm6/m0SIUpPVdMiIhm4+coO1wibk7+8jn6+ZT6EJbbZvjc9eQg7
ZKr8f/TpfmvHToG8LPOc6HqHzRiHlp3Yzsft+xm54r082n4F/noGhL+Hqvvj1aTj
C6Ip5N7VkzT+erMLMrjIbrmEP94cyQ==
=torZ
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-05-26
Misc update for mlx5 driver,
1) Clean up patches for lag and SF
2) Reserve bit 31 in steering register C1 for IPSec offload usage
3) Move steering tables pool logic into the steering core and
increase the maximum table size to 2G entries when software steering
is enabled.
* tag 'mlx5-updates-2021-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix lag port remapping logic
net/mlx5: Use boolean arithmetic to evaluate roce_lag
net/mlx5: Remove unnecessary spin lock protection
net/mlx5: Cap the maximum flow group size to 16M entries
net/mlx5: DR, Set max table size to 2G entries
net/mlx5: Move chains ft pool to be used by all firmware steering
net/mlx5: Move table size calculation to steering cmd layer
net/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPE
net/mlx5: DR, Remove unused field of send_ring struct
net/mlx5e: RX, Remove unnecessary check in RX CQE compression handling
net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet
net/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offload
net/mlx5e: TC: Use bit counts for register mapping
net/mlx5: CT: Avoid reusing modify header context for natted entries
net/mlx5e: CT, Remove newline from ct_dbg call
====================
Link: https://lore.kernel.org/r/20210527185624.694304-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Firmware FT pool is per device, but the software tracking of this pool
only services fs_chains users, and if another layer takes a flow table,
the pool will not be updated, and fs_chains will fail creating a flow
table, with no recovery till the flow table is returned.
Move FT pool to be global per device, and stored at the cmd level,
so all layers can use it.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently ASAP features fully utilize all the bits of the CQE's flow tag
and ft_metadata field. The flow tag field cannot be used because the
flow table tagging in FTE does not allow partial write.
We agree to reserve bit 31 of CQE's ft_metadata for IPsec to avoid
ASAP CT from dropping IPsec offloaded packet
Here is the new bit layout of REG_C1. Tunnel option id is reduced to
11 bits:
< IPSEC MARKER (1) | ESW_TUN_ID(12) | ESW_TUN_OPTS(11) | ESW_ZONE_ID(8) >
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
can and wireless trees. Notably including fixes for the recently
announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
touching some core parts of the stack, too, but nothing hair-raising.
Current release - regressions:
- tipc: make node link identity publish thread safe
- dsa: felix: re-enable TAS guard band mode
- stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()
- stmmac: fix system hang if change mac address after interface ifdown
Current release - new code bugs:
- mptcp: avoid OOB access in setsockopt()
- bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers
- ethtool: stats: fix a copy-paste error - init correct array size
Previous releases - regressions:
- sched: fix packet stuck problem for lockless qdisc
- net: really orphan skbs tied to closing sk
- mlx4: fix EEPROM dump support
- bpf: fix alu32 const subreg bound tracking on bitwise operations
- bpf: fix mask direction swap upon off reg sign change
- bpf, offload: reorder offload callback 'prepare' in verifier
- stmmac: Fix MAC WoL not working if PHY does not support WoL
- packetmmap: fix only tx timestamp on request
- tipc: skb_linearize the head skb when reassembling msgs
Previous releases - always broken:
- mac80211: address recent "FragAttacks" vulnerabilities
- mac80211: do not accept/forward invalid EAPOL frames
- mptcp: avoid potential error message floods
- bpf, ringbuf: deny reserve of buffers larger than ringbuf to prevent
out of buffer writes
- bpf: forbid trampoline attach for functions with variable arguments
- bpf: add deny list of functions to prevent inf recursion of tracing
programs
- tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT
- can: isotp: prevent race between isotp_bind() and isotp_setsockopt()
- netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
fallback to non-AVX2 version
Misc:
- bpf: add kconfig knob for disabling unpriv bpf by default
-----BEGIN PGP SIGNATURE-----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=peMK
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc4, including fixes from bpf, netfilter,
can and wireless trees. Notably including fixes for the recently
announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
touching some core parts of the stack, too, but nothing hair-raising.
Current release - regressions:
- tipc: make node link identity publish thread safe
- dsa: felix: re-enable TAS guard band mode
- stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()
- stmmac: fix system hang if change mac address after interface
ifdown
Current release - new code bugs:
- mptcp: avoid OOB access in setsockopt()
- bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers
- ethtool: stats: fix a copy-paste error - init correct array size
Previous releases - regressions:
- sched: fix packet stuck problem for lockless qdisc
- net: really orphan skbs tied to closing sk
- mlx4: fix EEPROM dump support
- bpf: fix alu32 const subreg bound tracking on bitwise operations
- bpf: fix mask direction swap upon off reg sign change
- bpf, offload: reorder offload callback 'prepare' in verifier
- stmmac: Fix MAC WoL not working if PHY does not support WoL
- packetmmap: fix only tx timestamp on request
- tipc: skb_linearize the head skb when reassembling msgs
Previous releases - always broken:
- mac80211: address recent "FragAttacks" vulnerabilities
- mac80211: do not accept/forward invalid EAPOL frames
- mptcp: avoid potential error message floods
- bpf, ringbuf: deny reserve of buffers larger than ringbuf to
prevent out of buffer writes
- bpf: forbid trampoline attach for functions with variable arguments
- bpf: add deny list of functions to prevent inf recursion of tracing
programs
- tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT
- can: isotp: prevent race between isotp_bind() and
isotp_setsockopt()
- netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
fallback to non-AVX2 version
Misc:
- bpf: add kconfig knob for disabling unpriv bpf by default"
* tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits)
net: phy: Document phydev::dev_flags bits allocation
mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
mptcp: avoid error message on infinite mapping
mptcp: drop unconditional pr_warn on bad opt
mptcp: avoid OOB access in setsockopt()
nfp: update maintainer and mailing list addresses
net: mvpp2: add buffer header handling in RX
bnx2x: Fix missing error code in bnx2x_iov_init_one()
net: zero-initialize tc skb extension on allocation
net: hns: Fix kernel-doc
sctp: fix the proc_handler for sysctl encap_port
sctp: add the missing setting for asoc encap_port
bpf, selftests: Adjust few selftest result_unpriv outcomes
bpf: No need to simulate speculative domain for immediates
bpf: Fix mask direction swap upon off reg sign change
bpf: Wrap aux data inside bpf_sanitize_info container
bpf: Fix BPF_LSM kconfig symbol dependency
selftests/bpf: Add test for l3 use of bpf_redirect_peer
bpftool: Add sock_release help info for cgroup attach/prog load command
net: dsa: microchip: enable phy errata workaround on 9567
...
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in struct
i40e_qvlist_info instead of one-element array, and use the struct_size()
helper.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Document the phydev::dev_flags bit allocation to allow bits 15:0 to
define PHY driver specific behavior, bits 23:16 to be reserved for now,
and bits 31:24 to hold generic PHY driver flags.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20210526184617.3105012-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull cgroup fixes from Tejun Heo:
- "cgroup_disable=" boot param was being applied too late confusing
some subsystems. Fix it by moving application to __setup() time.
- Comment spelling fixes. Included here to lower the chance of trivial
future merge conflicts.
* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix spelling mistakes
cgroup: disable controllers at parse time
There's some device specific fixes here but also an unusually large
number of fixes for the core, including both fixes for breakage
introduced on ACPI systems while fixing the long standing confusion
about the polarity of GPIO chip selects specified through DT, and fixes
for ordering issues on unregistration which have been exposed through
the wider usage of devm_.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmCrawIACgkQJNaLcl1U
h9B9Tgf/Sro65sL9JFR5EOWK71ljtUjJWyee9a4IBX82w0Ue6XqamrDzOuu3Kv5N
WBSO29o48RRFnLaWPNp0o9dkp4dtTNViThoRe5nJCmcOHKRTgh7e09EpewZWRRdY
uHV9Ii7v+xa1VUahHErCt88gahDwxb0n15nik1cn0mABgUYF1uEMHlD+B67y7m3m
95c63egMs9NW+htft2iUp/LrTDUBbqkQjimgvvQoLPd0wIpeQ/HYPgcaAvJ0nCao
UFsCMLL/qsSxdSQnO6pyoYT8BflhJxYySSOysfpWJAS+AyXVP6WZ+pBjNHT2AmPb
PO/skY6gRxIVn+KD/u2U5k7Q3WkeSw==
=MIpe
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's some device specific fixes here but also an unusually large
number of fixes for the core, including both fixes for breakage
introduced on ACPI systems while fixing the long standing confusion
about the polarity of GPIO chip selects specified through DT, and
fixes for ordering issues on unregistration which have been exposed
through the wider usage of devm_."
* tag 'spi-fix-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sc18is602: implement .max_{transfer,message}_size() for the controller
spi: sc18is602: don't consider the chip select byte in sc18is602_check_transfer
MAINTAINERS: Add Alain Volmat as STM32 SPI maintainer
dt-bindings: spi: spi-mux: rename flash node
spi: Don't have controller clean up spi device before driver unbind
spi: Assume GPIO CS active high in ACPI case
spi: sprd: Add missing MODULE_DEVICE_TABLE
spi: Switch to signed types for *_native_cs SPI controller fields
spi: take the SPI IO-mutex in the spi_set_cs_timing method
spi: spi-fsl-dspi: Fix a resource leak in an error handling path
spi: spi-zynq-qspi: Fix stack violation bug
spi: spi-zynq-qspi: Fix kernel-doc warning
spi: altera: Make SPI_ALTERA_CORE invisible
spi: Fix spi device unregister flow
Fix some spelling mistakes in comments:
hierarhcy ==> hierarchy
automtically ==> automatically
overriden ==> overridden
In absense of .. or ==> In absence of .. and
assocaited ==> associated
taget ==> target
initate ==> initiate
succeded ==> succeeded
curremt ==> current
udpated ==> updated
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
GENMASK() has an input check which uses __builtin_choose_expr() to
enable a compile time sanity check of its inputs if they are known at
compile time.
However, it turns out that __builtin_constant_p() does not always return
a compile time constant [0]. It was thought this problem was fixed with
gcc 4.9 [1], but apparently this is not the case [2].
Switch to use __is_constexpr() instead which always returns a compile time
constant, regardless of its inputs.
Link: https://lore.kernel.org/lkml/42b4342b-aefc-a16a-0d43-9f9c0d63ba7a@rasmusvillemoes.dk [0]
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=19449 [1]
Link: https://lore.kernel.org/lkml/1ac7bbc2-45d9-26ed-0b33-bf382b8d858b@I-love.SAKURA.ne.jp [2]
Link: https://lkml.kernel.org/r/20210511203716.117010-1-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull siginfo fix from Eric Biederman:
"During the merge window an issue with si_perf and the siginfo ABI came
up. The alpha and sparc siginfo structure layout had changed with the
addition of SIGTRAP TRAP_PERF and the new field si_perf.
The reason only alpha and sparc were affected is that they are the
only architectures that use si_trapno.
Looking deeper it was discovered that si_trapno is used for only a few
select signals on alpha and sparc, and that none of the other
_sigfault fields past si_addr are used at all. Which means technically
no regression on alpha and sparc.
While the alignment concerns might be dismissed the abuse of si_errno
by SIGTRAP TRAP_PERF does have the potential to cause regressions in
existing userspace.
While we still have time before userspace starts using and depending
on the new definition siginfo for SIGTRAP TRAP_PERF this set of
changes cleans up siginfo_t.
- The si_trapno field is demoted from magic alpha and sparc status
and made an ordinary union member of the _sigfault member of
siginfo_t. Without moving it of course.
- si_perf is replaced with si_perf_data and si_perf_type ending the
abuse of si_errno.
- Unnecessary additions to signalfd_siginfo are removed"
* 'for-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signalfd: Remove SIL_PERF_EVENT fields from signalfd_siginfo
signal: Deliver all of the siginfo perf data in _perf
signal: Factor force_sig_perf out of perf_sigtrap
signal: Implement SIL_FAULT_TRAPNO
siginfo: Move si_trapno inside the union inside _si_fault
Assorted pdx86 bug-fixes and model-specific quirks for 5.13.
The following is an automated git shortlog grouped by driver:
dell-smbios-wmi:
- Fix oops on rmmod dell_smbios
gigabyte-wmi:
- add support for B550 Aorus Elite
- add support for X570 UD
- streamline dmi matching
hp-wireless:
- add AMD's hardware id to the supported list
hp_accel:
- Avoid invoking _INI to speed up resume
ideapad-laptop:
- fix method name typo
- fix a NULL pointer dereference
intel_int0002_vgpio:
- Only call enable_irq_wake() when using s2idle
intel_punit_ipc:
- Append MODULE_DEVICE_TABLE for ACPI
platform/mellanox:
- mlxbf-tmfifo: Fix a memory barrier issue
platform/surface:
- dtx: Fix poll function
- aggregator: Add platform-drivers-x86 list to MAINTAINERS entry
- aggregator: avoid clang -Wconstant-conversion warning
- aggregator: Do not mark interrupt as shared
touchscreen_dmi:
- Add info for the Chuwi Hi10 Pro (CWI529) tablet
- Add info for the Mediacom Winpad 7.0 W700 tablet
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmCmV18UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zSIQf7BKTfLK4dw15XpDk4Tie5FruysEYB
HpS0tk5OoCiTIAT4J4DO+nbqx4+sGkyt/50uCptT4TI6CoZMgn1VqOCLF1cx0Q4T
ilKWt+63IqtxG7/EYYp0lbleb15ea/A8XEFyayWgO/z1Xgng6+j2NyiMpwdxV2WD
yGoO4E6VLmtxja7GaVK21s3M5z9iznul4G7pIo1yEkegxxSADUXjlqGkTEbM+eO7
EloIGjGSCVXyl0yzStJTzKY5kkI6MXlHwicQBlGiyZN+Dzcax+kTiViGUCd9bw2X
Sp9uSJ3DvVsKPWzjwwEXEz1wBAs1t3p0Y6WqwROjANKPgyishNCIzakkew==
=DK1K
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Assorted pdx86 bug-fixes and model-specific quirks for 5.13"
* tag 'platform-drivers-x86-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the Chuwi Hi10 Pro (CWI529) tablet
platform/x86: touchscreen_dmi: Add info for the Mediacom Winpad 7.0 W700 tablet
platform/x86: intel_punit_ipc: Append MODULE_DEVICE_TABLE for ACPI
platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios
platform/x86: hp-wireless: add AMD's hardware id to the supported list
platform/x86: intel_int0002_vgpio: Only call enable_irq_wake() when using s2idle
platform/x86: gigabyte-wmi: add support for B550 Aorus Elite
platform/x86: gigabyte-wmi: add support for X570 UD
platform/x86: gigabyte-wmi: streamline dmi matching
platform/mellanox: mlxbf-tmfifo: Fix a memory barrier issue
platform/surface: dtx: Fix poll function
platform/surface: aggregator: Add platform-drivers-x86 list to MAINTAINERS entry
platform/surface: aggregator: avoid clang -Wconstant-conversion warning
platform/surface: aggregator: Do not mark interrupt as shared
platform/x86: hp_accel: Avoid invoking _INI to speed up resume
platform/x86: ideapad-laptop: fix method name typo
platform/x86: ideapad-laptop: fix a NULL pointer dereference
